Chinese translation for "变形速率"
|
- deformation rate
rate of decay
rate of deformation
Related Translations:
扭曲变形: distortional deformationtravesty - paragon 变形能力: ability to deformdeformabilitydeformation propertyformability 变形角: angle of deformationdeformation angle 等温变形: isothermal deformation 变形分析: deformation analysis 抵抗变形: resistance to deformationresistance to distortion 变形再生: morphallactic regenerationmorphallaxiamorphallaxis
- Example Sentences:
| 1. | Deformation rate tensor
变形速率张量 | | 2. | 3 ) the temperature and the deformation rate are the key factors to prepare ultra - fine grain materials
( 3 )变形温度和变形速率是获得超细晶材料的关键。 | | 3. | This paper mainly describes workharden , moving regaining , and recrystallization of red copper in the process of hot deformation under different strain temperatures , different strain rates and different deformation degress
摘要从不同的变形温度、变形速率、变形程度三个方面来研究紫铜在热变形过程中对产生的加工硬化、动恢复和动再结晶的影响。 | | 4. | It ' s we1l known that the windshield material is an organic material . it shows visco - plastic behavior which is that the stress - strain curve , the yield stress and the limited stfess varied with the material deformation rate
众所周知，风挡材料为有机材料，一方面呈现出粘弹塑性特性，即材料的应力应变曲线、屈服应力、破坏应力都随着材料变形速率的变化而变化。 | | 5. | The main parameters ( extrusion ratio , temperature , article size , deformation velocity , configuration of die , lubrication etc . ) effecting powder extrusion formability and forming process of powder cladding wire have been analyzed
对影响粉末挤压成形性能的主要参数(挤压比、温度、颗粒度、变形速率、模具入口形状以及润滑等)以及粉末包覆线成形的工艺作了定性的分析。 | | 6. | The criteria of the permissive limit displacement and the changing ratio of displacement are studied to judge stability of whole analysis of surrounding rock and liner , so do the acceleration of displacement and speed ratio of deformation
利用失稳量测的统计资料，研究了容许极限位移量、位移变化率、位移加速度和变形速率比判别围岩和支护结构整体失稳的标准并给出了失稳的剿页x西南交通大学借土研究生学位论文。 ? ?位移判据。 | | 7. | Cone - based rheometer was modified to estimate the rheological properties of fresh mortar , which can measure yield stress and plastic viscosity of mortar in relative units . effects of many factors on rheological properties of mortar were studied . a set of test theory and method for designing rheological properties of mortar was recommended
用它研究了各种因素对砂浆流变性的影响；证实了砂浆的屈服应力与塑性粘度是互相独立的物理量，屈服应力决定变形能力，塑性粘度决定变形速率；为砂浆流变性设计提供了一套测试理论和方法。 | | 8. | Main content in simulation is the spatio - temporal evolution of the set of descriptive variables characterizing tectonic mineralization state under coupling of various processes as following : ( 1 ) variables related to forming and property of ore - forming fluid , such as dissolution rate of minerals ( include metal minerals ) in rock , concentration and saturation of aqueous species in fluid , temperature , pressure , and ionic strength etc . ; ( 2 ) variables related to structural deformation and fluid flow , such as stress , deformation rate , fracture network , porosity , fracture permeability ; ( 3 ) variables related to precipitation and mineralization , such as nucleation rate of gangue and metal minerals , accumulation precipitation of various minerals , etc . ; ( 4 ) spatio - temporal coupling relation of various variables above , such as the coupling relationship between spatio - temporal evolution of fracture permeability and flow and focus of fluid and ore - forming
模拟的主要内容是在各种过程耦合作用下，以下描述构造成矿体系的主要变量的时空演化：与成矿流体的形成和性质有关的变量，如地层中矿物（包括成矿物质）的溶解速率、流体中各组分的浓度与饱和度、流体温度、压力、离子强度等；与构造变形和流体运移有关的各变量，如应力与变形速率、岩石孔隙度、构造（断裂）渗透率等；与沉淀成矿有关的变量，如矿物（金属矿物和脉石矿物）的成核速率、各矿物的沉淀量等；上述各有关变量间的时空耦合关系，如断裂渗透率时空演化与流体流动、汇聚和成矿的耦合关系等。 |
- Similar Words：
- "变形丝" Chinese translation, "变形丝试验仪" Chinese translation, "变形丝织物" Chinese translation, "变形速度" Chinese translation, "变形速度灵敏度" Chinese translation, "变形速率张量" Chinese translation, "变形塑性" Chinese translation, "变形套利" Chinese translation, "变形特效" Chinese translation, "变形特性" Chinese translation
|
|
|
