Chinese translation for "变形抗力"

deformation resistance
distortion resistance
resistance of deformation
resistance to deformation

Related Translations:

变形:  1.(形状、格式起变化) be out of shape; become deformed; transshape; transfiguration; transformation; variant; transmogrification; modification : 自行车的前轮变形了。 the front wheel of the bicycle was out of

变形使变形:  deform

Example Sentences:

	1.	Experimental study of deformation resistance of trip800 steel 800钢变形抗力的试验研究
	2.	However , the poor ductility and strong resistance to deformation at elevated temperature currently limit their application 但这类材料的塑性差、高温变形抗力大,使其难以加工成形,阻碍了其实用化。
	3.	The model of the deformation resistance of weathering steel is calculated by measured value and it has higher fitting precision 用实测值回归出了耐候钢的新型变形抗力模型，而且该模型具有较高的拟合精度。
	4.	However , their application is currently limited by the poor ductility and strong resistance to deformation at elevated temperature 但这类材料的塑性差、高温变形抗力大,使其难以加工成形,阻碍了其实用化。
	5.	The results show that the deformation resistance is affected remarkably by both strain rate and deformation temperature , the deformation resistance decreases with the increase of temperature , and it increases with the increase of strain rate 结果表明：变形温度和应变速率对耐候钢变形抗力的影响最强烈；耐候钢的变形抗力随变形温度的升高而下降，随应变速率的提高而增大。
	6.	It also simulated the influence and relationship in the transfiguration resisting force , coefficient of he transfiguration resisting force , rolling area , rolling temperature , rolling pressure , loop length , the transition between loop length and loop high 模拟仿真出了变形抗力、接触面积、温度、轧制压力、活套套量、活套套量与套高转换等各个模型之间的相互影响。
	7.	The deformation resistance of the weathering steel during hot deformation has been studied using mms100 - simulator , and the relationship among deformation temperature , strain rate , degree of deformation and deformation resistance has been determined 摘要通过在mms100 - simulator热力模拟实验机上的热压缩实验，研究了不同热变形条件下耐候钢的变形抗力，考察了变形温度、应变速率及变形程度与变形抗力之间的关系。
	8.	The possible factors including the deviation of temperature in length and breadth of rod , the changes of transfiguration resisting force under the changes of temperature , the adjustment of roll gap , the variation of rolling pressure , the changes of roller speed during dynamic adjusting press , the unmatched of seconds - flux under the dimension fluctuation of the coming sample and so on . the whole system was a closed loop which factors in it interacts each other 可能的影响因素有:沿轧件纵横向温度变化、由温度引起的轧件变形抗力变化、轧机辊缝值变化、负载变化、电机调节系统由不稳定向稳定过渡过程中轧辊转速的变化(如咬钢过程中的动态速降后的回复阶段) 、来料尺寸波动造成秒流量不匹配等,整个仿真系统是各个因素相互影响关联的一个闭环系统。

Similar Words：

"变形菌纲，组成着色菌目" Chinese translation, "变形菌落" Chinese translation, "变形菌门" Chinese translation, "变形菌族" Chinese translation, "变形开裂" Chinese translation, "变形拷贝" Chinese translation, "变形课" Chinese translation, "变形空罐整形机" Chinese translation, "变形恐怖" Chinese translation, "变形孔隙介质" Chinese translation