| 1. | Structure and properties of cu - fe - cr - ni in - situ composites
原位复合材料的结构与性能 |
| 2. | Development of deformation processed copper base in - situ composites
形变铜基原位复合材料的研究现状及展望 |
| 3. | In - situ compatible composite of nylon 66 and thermotropic liquid crystalline polyamide
热致液晶聚酰胺与尼龙66相容原位复合材料研究 |
| 4. | Influence of preparation technology on structure and properties of cu - ag alloy in situ composites
合金原位复合材料结构与性能的影响 |
| 5. | Study on the compatibility of in - situ composite of polycarbonate and thermotropic liquid crystalline copolyester
热致液晶共聚酯原位复合材料相容性的研究 |
| 6. | This paper summarizes the research progress of nylon 6 in - situ composite civilly and abroad in recent years
摘要综述了近年来国内外尼龙6原位复合材料的研究进展。 |
| 7. | 4 . the reinforced and toughened pp / pa66 and pp / pa66 / gpp in - situ composites were firstly prepared via extrusion - drawing - injection method
首次采用挤出?拉伸?注塑法制备了pp pa66 、 pp pa66 gpp原位复合材料，取得了增强又增韧的效果。 |
| 8. | According to the different modifier , it is classified as follows : inorganic nanoparticle / nylon 6 in - situ composite , organic polymer / nylon 6 in - situ composite and carbon nanotube / nylon 6 in - situ composite
基于改性剂的不同，将其分为无机纳米粒子尼龙6原位复合材料、有机高分子聚合物尼龙6原位复合材料和碳纳米管尼龙6原位复合材料。 |
| 9. | Dry sliding wear behavior and electric sliding wear of cu - nanosized tib2 in - situ composites were investigated using a pin - on - disk test rig . it has been found that tib _ 2 nanoparticles improved the wear of resistance the in - situ composites
利用销-盘式摩擦磨损试验机研究了cu -纳米tib2原位复合材料/ cu - c (石墨)复合材料的干滑动磨损和电接触磨损行为。 |
| 10. | Using the special stirring equipment and the optimized stirring processing , some semi - solid al matrix in - situ composites slurry with small size of al3fe reinforcement phase and even distribution of reinforcement particles in mixing melts are achieved
在专用搅拌设备与优化设计后的搅拌方案共同作用下，能获得具有细小的强化相，且强化相粒子在熔体中分布均匀的半固态铝基原位复合材料浆料。 |
