| 1. | 3 . research pa ' s matching technology . , discuss microstrip matching network ' s design
3 .研究功放的各种匹配技术,着重讨论了微带线匹配网络的设计 |
| 2. | Deduction shows that a series inductor can be applied as the inter - stage matching network between the two stages
围绕级间匹配网络的实现这一核心问题，推导出级间匹配电路可以用一个串联电感实现。 |
| 3. | 4 . induce simulation ' s theory , as well as validating project ' s feasibility . simulate every amplifier ' s matching network by ads tool
4 .用ads仿真进行各级放大器的微带匹配网络设计和系统的优化。 |
| 4. | The results illustrate that loading lossy network can improve the performance of the system , but decrease the maximum gain
加载不同匹配网络的结果表明，加载有耗网络会改善系统的测向性能，但系统的最大增益要降低。 |
| 5. | The lna design method which absorbs the parasitic capacitance of esd is introduced and compared with the traditional design method
同时提出了将esd的寄生电容吸收到lna输入匹配网络中的设计方式,并与传统的计算方式做了对比。 |
| 6. | Loading the antennae with matching networks will not only decrease the vswr at the ports of the receivers , but also reduce the influence of the mutual coupling
加载匹配网络不但能降低接收机端口的驻波比，还能有效地减弱天线之间互耦的影响，改善系统性能。 |
| 7. | The high frequency matching network mainly used lumped element lowpass network , including the series capacitance , series inductance and shunt grounded capacitance
高频匹配网络主要采取集中参数低通形式，串联部分电感、电容参加匹配，并联部分对地电容参加匹配。 |
| 8. | And we design the matching structure between the transmission line and the cavity . from the simulation results we can find that in the field
Drude色散模型处理的等离子体在电磁模拟中作为负载的特性能较好的体现出来,而且匹配网络较好地实现了腔体和传输线间的匹配。 |
| 9. | In this paper , the traditional cascode structure of cmos lna is considered as a two - stage amplifier and inter - stage matching network is introduced accordingly
本文也对cmos低噪声放大器进行了分析，将传统共源共栅结构看作二级放大器级联形式，并由此引入级间匹配网络。 |
| 10. | 5 . in order to keep gain smooth , enhance output power and efficiency , and reduce reflect factor and attenuation , inner matching networks are needed
5 、采用内匹配网络技术,设置输入输出匹配网络,以保持增益和传输特性的平坦性,提高输出功率和效率,降低反射系数,减少损耗。 |
