Chinese translation for "加腋"

angle-table
haunching
tapered haunch

Related Translations:

腋:  名词1.(生理] (夹肢窝) axilla; armpit2.[植物学] (跟腋类似的部分) axil

梁腋:  hancehansehaunch of arch

腋动脉:  arteria axillarisarteriae axillarisaxillary artery

腋瓣:  calypteroncalyptracalyptronsquama

腋凹:  axillary notch

拱腋:  hancehansehauchhaunch

腋点:  under arm pointunderarm point

腋隔:  septum axillare

腋栉:  axillary ctenidium

腋弓:  arcus axillaris

Example Sentences:

	1.	Each bridge is a two girder continuous structure extending over three spans with small haunches at the interior piers . 每一座桥是双主梁的连接梁，延伸三跨，在中间桥墩处具有小的加腋承托。
	2.	The internal power of haunch over the frame structure of rectangular tunnels 加腋对矩形隧道框架的内力影响
	3.	Meanwhile , the intersection part of the bifurcation pipe is haunched , which helps to relief the stress concentration of the bifurcation pipe 同时，经分析认为在岔管相贯部位采取了加腋措施，可有效缓解岔管部位的应力集中。
	4.	As far as the solid inclined column - wall transfer r . c joint is concerned , the inclined column with a bigger angle 、 transfer beam and square column work as a whole , and the load transfer mechanism is similar to the transfer beam . the stress state in the wall is much more even , so the effect of transfer is much better than that of the hollow inclined column - wall transfer r . c joint 对无孔斜柱转换节点而言，由于斜柱与转换梁和方柱形成了一个整体，而且斜柱角度较大，因而其传力机制和加腋的转换梁类似，但薄壁柱中的应力分布更为均匀，转换效果更好。
	5.	From the analysis , some suggestion about joint rigidity design is put forward : 1 . joint initial rigidity can be enhanced within the limited range when to increase end - plate thickness ; 2 . the rigidity and ultimate moment can be enhanced obviously when to adopt the beam with inclined section or to add axilla at the connections between beam and column ; 3 . withm the permissive construction condition , exteriorly extended end - plate inclinedly placed is suggested to be applied firstly ; 4 . when the rate of joint rigidity to beam rigidity , that is called , is less than 0 . 1 , the joints can be regarded as zero - rigidity joints ; on the other hand , if is more than 26 , it is rigid connection joints 采用斜截面梁并在梁柱交接处局部加腋能明显提高节点刚度和梁的抗弯能力； 3在允许的施工条件下，应优先采用外伸式端板斜放节点，有利于提高节点刚度，进而提高节点的抗弯能力； 4节点刚度与其连接构件的刚度比值0 . 1时，可按铰接节点设计； 26时，可按刚接节点设计。

Similar Words：

"加野" Chinese translation, "加野麦克斯" Chinese translation, "加页码" Chinese translation, "加叶饰" Chinese translation, "加叶形饰" Chinese translation, "加腋拱" Chinese translation, "加腋梁" Chinese translation, "加腋梁 托臂梁" Chinese translation, "加腋系数" Chinese translation, "加腋榫接" Chinese translation