| 1. | Experimental study of drop deformation and breakup in simple shear flows
简单剪切流动中液滴断裂机理 |
| 2. | Numerical simulation of drop deformation and breakup in shear flow
剪切流动条件下液滴变形和断裂的数值模拟 |
| 3. | Low - dimensional modeling and numerical simulation of transition in simple shear flows
简单剪切流动中转捩的低维模式与数值模拟 |
| 4. | Effects of steady shear flow on the deformation of leukocyte adhered to vascular endothelial surface
稳定剪切流动对黏附于血管表面的白细胞变形的影响 |
| 5. | Study on the deformation of leukocyte adhered to vascular surface under steady shear flow by using a compound drop model
用复合液滴模型研究稳定剪切流动下黏附于血管表面白细胞的变形 |
| 6. | To analyze particularly the shear flow and chemical reaction procedure occurred in supersonic turbulent combustion field , supersonic combustion mechanism is surveyed on by reading papers thoroughly
为细致分析超音速湍流燃烧流场的剪切流动及化学反应过程,针对超音速燃烧机理进行了深入的文献调研。 |
| 7. | Non - linear damping characteristics of mrf dampers was described qualitatively , providing a theoretical basis for the design of mrf dampers with mixed mode of pressure - gradient flow and shearing flow in a single cylinder
定量描述了磁流变液阻尼器的非线性阻尼特性，为单筒压差流动和剪切流动混合模式磁流变液阻尼器的设计提供了理论依据。 |
| 8. | Two different work condition of combustion in chamber is contrasted to see the effect of flowing state on combustion and it concluded that : first , shear flowing enhances air and gas ’ s diffusion and mixing
对比两种不同工况燃烧室内的燃烧状况,深入认识了不同来流条件对超音速燃烧状况的影响。其主要结论有:剪切流动可以提高空气与燃气的扩散掺混强度。 |
| 9. | The work rate of the metal in pits was considered to be the frictional work rate , and when the work rate was great than the work rate to produce shear flow at the interface between the metal and tool , the friction was thought to change into sticky friction from slide friction
摩擦功率等于此部分金属的变形功率，当它的变形功率大于在界面产生剪切流动的功率时，摩擦由滑动摩擦转变为粘著摩擦。 |
| 10. | The work rate of the metal in pits was considered to be the frictional work rate , and when the work rate was great than the work rate to produce shear flow at the interface between the metal and tool , the friction was thought to change into sticky friction from slide friction
摩擦功率等于此部分金属的变形功率，当它的变形功率大于在界面产生剪切流动的功率时，摩擦由滑动摩擦转变为粘着摩擦。 |
