| 1. | Adiabatic decomposition temperature
绝热分解温度 |
| 2. | The result of thermogravimetric analysis ( tg ) shows that its thermo - decomposing temperature rises obviously
热重量试验表明含稀土复合弹性材料的热分解温度大幅度上升。 |
| 3. | 05 . 02 vapor pressure - temperature relationship and initial decomposition temperature of liquids by isoteniscope , method of test for
用液体蒸汽压力器测定液体的蒸气压力-温度关系和初始分解温度的方法 |
| 4. | Standard test method for vapor pressure - temperature relationship and initial decomposition temperature of liquids by isoteniscope
蒸气压力计测定液体的蒸气压力-温度关系及起始分解温度的标准试验方法 |
| 5. | Therefore , it is unlikely that decomposition temperatures for non - stick cookware would be reached without burning food to an inedible state
也就是说，在食物被烧焦到出现无法食用的情况之前，不粘涂层是不会达到分解温度的。 |
| 6. | Swelling test , dsc and tg were used to determine the solubility parameter , glass - transition temperatures and thermolysis temperatures of polycondensates
使用溶胀试验、 dsc 、 tg对其溶度参数、玻璃化转变温度、热分解温度等参数进行了测定。 |
| 7. | This kind of brake shoes uses organic and inorganic fibers composition reinforced material instead of asbestos , and takes phenolic resin with additives of cashew shell oil and melamine as bond
这种刹车块用交联性有机纤维和无机纤维复合增强材料取代石棉并以腰果壳油、三聚氰胺对作为粘合剂的酚醛树脂改性，使其分解温度提高。 |
| 8. | As the content of the expanded vermiculite was 20 % , the tonset of the polybenzoxazine ( mulitphenol type ) / vermiculite hybrid nanocomposites from its tga cure was 35 chigher than that of the polybenzoxazine ( mulitphenol type ) / phlogopite composites
膨胀蛙石含量为20时，插层纳米固化物的起始热分解温度高于金云母的约35t 。 |
| 9. | Its bend strength is 144 . 1 mpa , impact strength is 13 . 5 kj / m2 and martin heat - resistant temperature is 160 . and the heat decompounding temperature of the resin is 350 , which is confirmed by the tga of cured resin
同时对改性后树脂固化物进行热失重分析，确定树脂固化物热分解温度为350 。表明通过改性后的双马树脂具有较好的力学性能和耐热性。 |
| 10. | The decomposition temperatures of this kind of pis are above 500 , the cutoff number is below 350nm , the rate of water absorption is below 1 % , these indicated that this kinds of pis exhibited excellent heat resistance , better transparent , and lower water absorption
部分聚酰亚胺还可溶于甲苯。此外，这类聚酰亚胺的热分解温度在500以上，紫外截止波长在350nm以下，说明它们具有优良的耐热性和较好的光学透明性。 |
