Chinese translation for "出口马赫数"
|
- exit mach number
Related Translations:
马赫数陡度: mach number gradient 起始马赫数: initial mach number 马赫数技术: mach number technique 巡航马赫数: cruise mach number 气流马赫数: flow mach numberstream mach number 设计马赫数: design mach number 马赫数分量: mach number componentmach-number component
- Example Sentences:
| 1. | Valve outlet mach number
阀出口马赫数 | | 2. | The results show that to design a supersonic / hypersonic nozzle of wind tunnel must consider the effect of variable specific heat , which gives reference to nozzle and wind tunnel design
考虑这一因素后，喷管出口马赫数接近设计马赫数，其设计精度有较大提高。本方法可为超音速高超声速喷管设计和反设计提供参考。 | | 3. | When the serpentine inlet is running at the exit mach number ma ( subscript e ) = 0 . 45 , the total pressure recovery coefficient equals 0 . 90 , and synthesis distortion equals 13 . 85 %
本研究的蛇形进气道在出口马赫数为0 . 45时，总压恢复系数为0 . 90 ，综合畸变指数为13 . 85 % ，总压恢复较低，畸变较大，超出了一般航空发动机的承受范围。 | | 4. | The results prove that : ( 1 ) when the mach number of the flow at the exit increases , the total pressure recovery decreases , and the circular steady total pressure distortion coefficient , turbulence intensity and synthesis distortion increase
研究结果表明： ( 1 )地面工作状态下，随着出口马赫数的增加，蛇形进气道出口截面的总压恢复系数不断下降，而稳态周向畸变指数、紊流度和综合畸变指数均上升，稳态径向畸变指数变化不大。 | | 5. | To prove the accuracy of the mach number , and the parameter homogeneity of the design nozzle " s exit , cfd calculate has carried on the design results . under the condition of supersonic and hypersonic flow , and a certain range of temperature , and mach number , the conclusion of the influence of specific heat to nozzle design is drawn
为了验证所设计的喷管出口马赫数的大小和喷管出口流场的均匀性，采用nnd格式和b l湍流模型求解雷诺平均n - s方程，对设计结果进行了cfd验算，得出了在一定温度范围内，超音速、高超声速流动的条件下，不同马赫数范围内变比热容对喷管型面和喷管出口马赫数的影响。 | | 6. | Then , the one dimensional model is used to study on some factors ( viscosity , the heat given out by the chemical reaction in the chemical laser ) which bring the loss of the total pressure . the answer shows that increasing the mach number at out of the nozzles in the laser can reduce the loss of the total pressure
在此基础上,用简化的一维模型研究了引起激光器总压损失的几个要素,它们是:喷管的粘性损失,光腔内的放热化学反应。研究的结果表明,提高喷管出口马赫数有利于减少这些因素导致的总压损失。 |
- Similar Words：
- "出口螺纹接套" Chinese translation, "出口螺纹接套管" Chinese translation, "出口落空" Chinese translation, "出口码" Chinese translation, "出口码头" Chinese translation, "出口买方信贷102" Chinese translation, "出口卖方信贷" Chinese translation, "出口卖方信贷105" Chinese translation, "出口忙碌" Chinese translation, "出口贸易" Chinese translation
|
|
|
