Mobile
Log In Sign Up
Home > english-chinese > "凹坑" in Chinese

Chinese translation for "凹坑"

pit; [冶金学] steel pit 短语和例子


Related Translations:
藻坑:  algal pit
窝凹:  fossapit
成凹:  foveation
凹坡:  concave slopeconcaveslopewaning slope
凹出:  the quality or fact of being prominent or distinguished
凹缝:  concave jointdeep seamdeepseamgroove jointgrooved jointopen jointrebaterecessed joint
凹光栅:  concave diffraction gratingconcave gratings
凹创:  fillister
凹切:  u under cut
凹域:  concave region
Example Sentences:
1.The wood is full of pits and needs sanding .
这木料上到处是凹坑,需用砂纸打磨一下。
2.The small pits that form on the surface act as stress raisers .
在表面形成的小凹坑起到应力增高源的作用。
3.Process of crater formation upon electric discharge textured roll surface
毛化轧辊表面凹坑形成过程
4.Material removal rate study of wire electrical discharge machining pocketing
线电极放电铣削凹坑的材料去除率规律研究
5.The dent is not big enough to be worth hammering out , we can fill it in
凹坑太小,不值得费事碾平,我们把它填上就可以了。
6.Finite element analysis for pits on outer surface of thickwall vessel subjected to internal pressure
内压厚壁容器外壁表面凹坑应力场有限元分析
7.With such small pit areas , the number of possible errors in reading the disc is limitless
采用这样小的凹坑区,在读盘中可能出现错误的数量是很多的。
8.Good stickiness , good holding ability 、 good clearance of impurity in depression and no incomplete glue
粘性佳、保持力佳、清除凹坑杂质效果佳、不残胶。
9.The smallest pits on a dvd are about 0 . 4 microns wide , whereas cd pits have a minimum width of 0 . 83 microns
Dvd上最小的凹坑宽约为0 . 4微米,而cd上的凹坑的最小宽度为0 . 83微米。
10.When the cutting plane is passed through the axes of holes or hollows , those features must be drawn as sections
当剖切平面通过回转面形成的孔或凹坑的轴线时,这些结构按剖视绘制,如图所示。
Similar Words:
"凹镜性凹凸透镜" Chinese translation, "凹科" Chinese translation, "凹刻" Chinese translation, "凹刻制版术" Chinese translation, "凹刻装饰" Chinese translation, "凹坑,表面微凹" Chinese translation, "凹坑表面缺陷" Chinese translation, "凹坑衬垫" Chinese translation, "凹坑的形成" Chinese translation, "凹坑和小岛" Chinese translation