Mobile
Log In Sign Up
Home > english-chinese > "冶金方法" in Chinese

Chinese translation for "冶金方法"

metallurgical process

Related Translations:
冶金业:  metallurgist
冶金冲天炉:  metallurgical blast cupola
等离子冶金:  plasma metallurgyplasmametallurgy
冶金焦炭:  foundry cokefurnace cokemetallurgic cokemetallurgical cokesmelter coke
坏 冶金:  flap disc
冶金自动化:  metallurgical automationmetastable dceomposition
冶金电解:  metallurgical electrolysis
冶金工作者:  metallargistmetallurg
冶金反应堆:  metallurgical reactor
金属陶瓷冶金:  ceramictal combinations
Example Sentences:
1.This product is manufactured by powder metallurgy through compacting and pressure working
本产品系采用粉末冶金方法经压坯和压力加工而制成。
2.In this dissertation , the magnets were prepared by powder metallurgy . powders of ag were added during ball milling , and powders of al and ti were added separately and jointly during ball milling , while al and ti were jointly added during melting . the samples were sintered for 0 . 5h at 1090
本文采用粉末冶金方法制备烧结磁体,在制粉阶段添加ag元素,并单独和复合添加ti 、 al元素,在熔炼阶段复合添加ti 、 al元素,坯体在1090烧结0 . 5h 。
3.In the study , powder metallurgy was adopted to fabricate discontinuous cf / cu composite . the surface treatment of carbon fibers and fabricating technology of the composite were two keys of the study . and microstructure and properties of the material were also researched more systemically
本课题尝试采用粉末冶金方法制备非连续c _ f / cu复合材料,对碳纤维的表面处理、复合材料的制备工艺进行了重点研究,并对复合材料的组织及性能进行了较为系统的研究。
4.6013 aluminum alloys containing different main alloying elements minor alloying elements were designed and prepared by ingot - metallurgy processing . the tesile mechanical and aging properties of the studied alloys were tested ; the microstructure of those alloys were observed and analyzed using optical microscope ; the influence of main alloying element mg , si , minor alloying elements mn , cu and homogenization process on the structure and property of studied alloys were studied
采用铸锭冶金方法,设计并制备了不同合金元素含量的6013铝合金,将铸锭热加工以后,测试了合金的拉伸力学性能和时效性能,采用金相显微镜观察分析了合金的显微组织结构,研究了合金中主合金元素mg 、 si ,微量元素mn 、 cu添加量、均匀化温度和时间对合金组织和性能的影响。
5.In the present dissertation , the densification mechanisms and the structure controlling of various transient layers of w - mo - ti flier - plates with graded wave impedance were mainly investigated . wholly dense w - mo - ti flier - plates were then prepared by powder stacking and hot - pressing . in order to achieve a required wave impedance profile and a quasi - continuous change along the thickness direction , the ratios of components in transient layers were well adjusted
论文采用粉末冶金方法,详细研究了w - mo - ti体系梯度飞片材料中各组元的烧结致密化机理与控制方法,以精细控制不同配比的混合粉末的铺填方式与铺填结构来减小梯度飞片材料内部波阻抗值的跃变幅度,成功制备出波阻抗按指定分布特征沿厚度方向准连续变化的、波阻抗面平行度高并且整体致密的w - mo - ti体系梯度飞片。
6.The results indicate that arc melting is a good method to produce nb - si system intermetallics due to its simpler technics , lower cost and compact products . however , powder metallurgy is found to be not suitable to produce the nb - si system intermetallics due to its coarse and loose products resulting from the poor molding property of nb and si mixed powders . optical floating zone technology , which is used to fabricate nb - si intermetallic composites for the first time , is also found to be a good way to produce nb - si system intermetallics because of its compact products and good property despite of its relatively high cost
结果表明,电弧熔炼方法制备得到的nb - si系金属间化合物比较致密,且制备工艺简单,经济实用,是一种合适的nb - si系金属间化合物制备方法;由于nb 、 si元素粉末的成型性很差,用粉末冶金方法(热压烧结和冷等静压)制备的nb - si系金属间化合物表面粗糙、致密度低,且成本较高,不宜用于制备nb - si系金属间化合物;首次用光学悬浮单晶生长技术制备的nb - si系金属间化合物复合材料致密度很高,尽管成本稍高,但由于性能最佳,也是一种合适的nb - si系金属间化合物制备方法。
Similar Words:
"冶金电化学" Chinese translation, "冶金电解" Chinese translation, "冶金动力" Chinese translation, "冶金反应堆" Chinese translation, "冶金反应工程学" Chinese translation, "冶金分析化学实验室安全技术标准" Chinese translation, "冶金粉尘" Chinese translation, "冶金工厂" Chinese translation, "冶金工程" Chinese translation, "冶金工程控制" Chinese translation