| 1. | When this is done , the values are read out in a single process
当这些完成之后，这些值就会被一个信号处理程序读出。 |
| 2. | There can be only one signal handler per signal per process active at any instant
在任何瞬间，只能有一个信号处理程序处理一个活动进程的一个信号。 |
| 3. | It is not necessary to design more involved hardware circuits . it focuses on the design of digital signal processing program
不必搭设过于复杂的硬件电路，它主要侧重于信号处理程序的设计。 |
| 4. | To improve the reusage of radar signal processing program code , an object oriented universal radar signal processing framework is proposed
摘要为提高雷达信号处理程序代码的可重用性，设计了一种基于面向对象的雷达信号处理通用流程框架。 |
| 5. | This paper presents a method of realization of numeric transducer using tms320c542 dsp . the program of numeric down - transducer and multi - rate sampling is given
摘要在tms320c542数字信号处理器上，用查表方法实现了dsp数字变频器，并给出相关的数字下变频和多抽样率信号处理程序。 |
| 6. | Risc / dsp is a hybrid of traditional risc and dsp processor , and is more capable in embedded application area with both characteristics of risc and dsp
作为risc和dsp融合体的risc dsp架构，由于既善于执行系统程序，又善于执行信号处理程序，所以能够较好的适应嵌入式系统的发展。 |
| 7. | Experiments showed that the methods improved signal - to - noise ratio and testing sensitivity greatly , and met the requirement of real - time testing because of the simplicity of the signal processing program
经实验验证，这些方法大大提高了检测信号的信噪比和装置的检测灵敏度，而且信号处理程序简单，满足实时检测的要求。 |
| 8. | By utilizing the knowledge of digital circuit and simulation circuit , the system designs the pretreatment dealing circuit of the myoelectrical signal , which has the feature of big input impedance well suppress of public module and high gains . then the signal is gathered with " zhentong " data gathering after dealing with , and the software of signal processing is explored before the myoelectric signal is analyzed . after picking up eigenvalue , it is proved that the result is unanimous basically with the data of the relevant materials ; the other is to control artificial hand by the eigenvalue of the myoelectric signa l and at last the system gets very good control results
即利用数字电路和模拟电路等相关知识，设计了具有输入阻抗大、共模抑制好、增益高等特点的肌电信号前置处理电路，利用“振通”数据采集仪对处理后的信号进行采集，并利用快速傅立叶变换的相关知识编写了信号处理程序，对肌电信号进行了波形分析、幅值谱分析和功率谱分析，提取了信号特征值，与相关资料的数据相比，基本一致；二是利用肌电信号的特征值对肌电假手进行控制。 |
