| 1. | Investigative experimental teaching of the heat transfer course
传热学的研究性实验教学 |
| 2. | Based on the principle of heat conduction in solids , a model predicting surface temperature of a sliding tire is presented
基于固体传热学理论，给出了计算滑动轮胎接地面温度的模型。 |
| 3. | According to the theory of heat conduction , numerical model was constructed and verified by the use of the fluent software
根据传热学的原理建立了凝汽器的数值模型，从而模拟出凝汽器的实际换热情况。 |
| 4. | With the unique self - made cooling system , the ly12 is researched through the above method and the ultra - fine grain was obtained
应用传热学和塑性力学理论分析了采用该方法制备棒状超细晶材料的力学条件和变形条件。 |
| 5. | According to heat transfer and hydrodynamics , the thermal flow dynamics and the thermal resistance microchannel heatsink are analyzed
根据传热学和流体力学理论，本论文对微通道热沉进行了热流模型分析，理论推导了微通道热沉的热阻。 |
| 6. | Introducing heat exchange theory and finite element theory , and deducing the theory that applies finite element method to thermal analysis and thermal stress analysis
介绍了传热学基本理论知识,有限元方法思想。对有限元法在热分析和热应力分析中的具体应用进行了理论推导。 |
| 7. | Therefor , numerical simulation technology is an efficient and ideal method to research the heat transfer , to design and optimize rib - tube heat transfer
结合实验方法对数值模拟结果进行研究，表明数值模拟结果与实验结果比较吻合。因此，数值模拟技术是研究传热学问题理想而又有效的手段。 |
| 8. | According to the theory of heat transfer , bf hearth bottom models were built based on actual examples by software with vc language , the calculated results in good accordance with the data of bf thermal couples
摘要从传热学的角度出发，利用vc编制炉缸炉底温度场计算软件，对国内某些高炉进行了实例建模。 |
| 9. | Based on the principles of co2 laser machining polymer , heat conduction theory and energy conservation principal at the ablation front , a three dimensional transient ablation model of laser machining was built
在co2激光加工聚合物原理基础上，根据传热学原理和烧蚀面能量守恒原理，建立了激光加工三维暂态烧蚀模型。 |
| 10. | Based on the theory of porous medium flow and the porous medium heat transfer , the temperature field models of the welibore and adjacent formation have been constructed for production wells
本文针对油田开发中油井的生产实际情况，基于多孔介质流动力学和多孔介质传热学理论，建立了油井井筒及其周围地层的温度场模型。 |
