| 1. | The smallest load capable of maintaining the bar in a slightly bent form is called the critical or bucking load .
使杆保持稍微弯曲形状的最小载荷称为临界载荷或临界压曲载荷。 |
| 2. | Imitation algorithm about the critical load stability of pressed pole
压杆稳定临界载荷的拟合算法 |
| 3. | Study on critical load and elastic stability of drilling riser
钻井隔水导管临界载荷及弹性稳定性研究 |
| 4. | Hydraulic fluid power - cylinders - method for determining the buckling load
液压动力.液压缸.临界载荷的测定方法 |
| 5. | Euler critical load
欧拉临界载荷 |
| 6. | Lateral buckling of pin - ended beam with a couple applied at one end of pin - ended beam
狭长矩形简支梁一端受力偶作用时的侧向屈曲临界载荷 |
| 7. | The wear resistance mechanisms and decision of critical normal load for in - situ granular fe , mn 3c steel matrix composites
钢基自生复合材料的磨损机理及临界载荷确定 |
| 8. | Some double bottom structures with imperfection are analysed by nonlinear fem , and compared with ideal structure
本文还对部分骨材开裂的双层底板架进行了非线性有限元分析，得出不同开裂情况下板架的临界载荷。 |
| 9. | The directions of crack orientation and the critical loads predicted by the above criterions coincide with the experiment results
运用上述各准则对这些v型切口模型的裂纹起裂方向和临界载荷进行了理论预测，预测结果与实验结果基本吻合。 |
| 10. | Physical model and research development of scratch test are reviewed in this paper . the physical relationship between critical load lc measured by scratch test , shear strength and adhesion energy exists . the critical load lc can be used to characterize adhesion strength of hard coating
本文总结了划痕试验法的物理模型及研究现状，临界载荷与涂层和基体之间的界面剪切强度和附着功有物理关系，临界载荷能够表征涂层与基体的结合力。 |
