Chinese translation for "临界冷却速率"
|
- critical cooling rate
Related Translations:
临界测量: criticality measurement 临界塑性变形: critical plastic deformation 临界成分: critical composition 临界相对湿度: critical relative humidity (crh)critical relative humidity(crh)critical relative moisturecriticalrelativemoisture 临界线: critical linecritical locus
- Example Sentences:
| 1. | Based on these experiments , it may be claimed that there is segregation of sn to grain boundaries in 0 . 15 % c steel during cooling from a high solution treatment temperature . this segregation reduces grain boundary cohesion , which results in low hot ductility and intergranular fracture 通过试验和计算得出: sn在0 . 1swt . % c钢中发生非平衡晶界偏聚的临界时间为1245左右,临界冷却速率大约为8 / s ,与试验结果基本一致。 | | 2. | This segregation behavior of sn accords with the mechanism of non - equilibrium segregation . it can be obtained through the theoretical calculations that the critical time of sn non - equilibrium segregation is 124 seconds at 750 and the critical cooling rate is 8 / s when cooling from 1320 . it is suggested that controlling the cooling rate during continuous casting to avoid the critical cooling rate ( 8 / s ) and avoiding high stress near the trough temperature ( 750 ) may control the form 通过研究残留元素sn的偏聚机制及其对o . 15wt . % c钢热塑性的影响,对试验钢进行脆性预测:建议在该钢的连铸过程中弯道矫直温度尽量避开塑性谷底温度750 ,二冷区的冷速尽量避开临界冷却速率8 / s ,从而可以减少该低碳钢连铸坯表面裂纹和横向裂纹,提高其成材率。 |
- Similar Words:
- "临界雷诺数" Chinese translation, "临界冷点" Chinese translation, "临界冷凝温度" Chinese translation, "临界冷凝压力" Chinese translation, "临界冷却速度" Chinese translation, "临界离机高度" Chinese translation, "临界离机速度" Chinese translation, "临界粒度" Chinese translation, "临界粒子数" Chinese translation, "临界粒子数反转密度" Chinese translation
|
|
|