| 1. | Multi - layer coextrusion technology for - metallocene - based pe
茂金属聚乙烯多层共挤吹塑技术 |
| 2. | Constrained geometry metallocene catalyst
限定几何构型茂金属催化剂 |
| 3. | Structure and tensile properties of metallocene polyethylenes
茂金属聚乙烯结构与拉伸性能的研究 |
| 4. | On toughness of polypropylene with metallocene polyolefin elastomers
茂金属聚烯烃弹性体增韧聚丙烯的研究 |
| 5. | Homogeneous metallocene catalyst
均相茂金属催化剂 |
| 6. | The structure of the metallocene had an important influence on the maximum activity of the comonomer effect
共聚催化剂的结构对整个原位共聚体系活性的影响比较明显。 |
| 7. | The new development and the application of metallocene ethylene / octene copolymer were reviewed with 20 references
摘要综述了茂金属乙烯辛烯共聚物作为弹性体材料的最新应用进展。 |
| 8. | Those metallocene branched polyethylene exceed all others in basic properties with processing properties being close to the general polyethylene
开发的茂金属支化聚乙烯基本性能优于通用聚乙烯，而加工性能接近通用聚乙烯。 |
| 9. | The application experiment data show that metallocene branched polyethylene prepared by the new method are applicable to tubing and large - scale hollow container
应用试验表明，开发的茂金属支化聚乙烯可用于制造管材和大型中空容器。 |
| 10. | The effects of the concentration , the molar ratio of mao to the metallocene c3 or c4 and the polymerization temperature on the polymerization activity were also investigated individually
这为进一步研究两种催化剂的复配奠定了基础。并且发现在双亚胺基吡啶铁配合物与茂金属复配时存在共单体效应。 |
