| 1. | Electroless polymerization ; electropolymerization ; aniline ; polyaniline
无电聚合电聚合苯胺聚苯胺 |
| 2. | A novel method ( in situ electropolymerization method ) of biosensor elaboration was put forward
提出了生物传感器构制的新方法?原位电化学聚合法。 |
| 3. | Carbon fibre electrode modified by electropolymerization of phenothiazine dyes and its electrocatalysis toward the reduction of hemoglobin
电聚合染料修饰碳纤维电极及对血红蛋白电催化的研究 |
| 4. | 1 . in our papers , the glycine was modified on the surface of glassy - carbon electrode by the oxidative electropolymerization of cv to fabricate the polyglycine modified electrodes
1 、本文首先通过循环伏安法将甘氨酸氧化电聚合修饰在玻碳电极表面，制成聚甘酸膜化学修饰电极。 |
| 5. | It combined the advantages of porous polymer and electropolymerization method been used for biosensor construction , and the resulting biosensor exhibited not only high sensitivity but also good stability
它结合了多孔聚合物材料和电化学聚合法制备生物传感器的优点，所得传感器既具有高的灵敏度又具有好的稳定性。 |
| 6. | The phenol biosensor prepared by in situ electropolymerization showed excellent operational and storage stability . the sensor lifetime was 8 months , which is much better than that ( in general 3 months ) reported in literatures
由原位电化学聚合法制备的酚传感器具有优异的操作和贮存稳定性，其寿命高达8个月，远高于文献报导的结果(一般在3个月以内) 。 |
| 7. | In another way , they prevented ion exchange process in some degree because of space steric hindrance . in short , this paper will make a good foundation for further application research about urushiol hybrid material and electropolymerization in future
综上所述，本文用两种不同方法制备了不同聚合漆酚纳米无机物杂化材料，研究了合成方法，结构特征及性能等。 |
| 8. | In at last , on base of electropolymerization of urushiol , electropolyurushiol / cus hybrid film ( hybrid - epu / cus ) was manufactured by the method of ion exchange process . then hybrid - epu / cus was characterized by ft - ir , fluorescence , dmta xrd and tem
最后，本文在电化学聚合漆酚的基础上，用电化学聚合漆酚铜配合物，在一定条件下与nfos作用，可获得聚合漆酚纳米clls杂化材料。 |
| 9. | Electropolymerization methods have some attractive features including the easy adherence of the polymeric films to the surface of conducting electrodes of any shape and size and the ability to control thickness and porosity of the films by adjusting scan rate and time during electropolymerization
用电聚合法制备分子印迹已有报道。通过调节聚合速度和聚合时间可以得到不同疏密程度的电聚合膜，并且电聚合膜可以在任何形状和大小的导电电极表面上形成。 |
| 10. | The pyrogallol was adhered on the surface of the solid electrode by the direct oxidative electropolymerization to construct the chemical sensors for bi ( iii ) . the sensor exhibits perfect long stability and reproducibility . a low detection was obtained in the determination of bi ( iii ) and this way can be applied to determine the real samples such as human hair and nails
2 、将修饰剂邻苯三酚直接电聚合到固体电极的表面，研制bi ( )离子化学传感器，该修饰电极稳定性和重现性很好，克服了以往碳糊电极机械强度差、重现性不好的缺陷，测定bi ( )达到了很低的检出限，应用于人发和指甲等实际样品的测定。 |
