| 1. | Catalytic dehydrogenation of methanol to formaldehyde a review
甲醇催化脱氢制无水甲醛催化体系研究进展 |
| 2. | The catalytic properties of ptsnna a2o3 catalysts for propane dehydrogenation
3催化剂丙烷脱氢反应性能研究 |
| 3. | A study on cr ceo2 catalysts and their catalytic performance for dehydrogenation of ethane
2体系及其对乙烷脱氢反应催化性能的研究 |
| 4. | A study on catalytic capacity of oxidative dehydrogenation of propane to propylene over k , ca , mg ferrite
铁酸盐的丙烷氧化脱氢制丙烯催化性能研究 |
| 5. | Study on coupling of dehydrogenation of propane with reversed water - gas shift reaction for propylene synthesis
丙烷脱氢与逆水煤气变换耦合制丙烯反应的研究进展 |
| 6. | Technology of producing cyclododecanon from cyclododecanol by continuous dehydrogenation in liquid - solid - phase in fixed - bed
固相连续法脱氢制环十二酮工艺 |
| 7. | Catalytic activity comparison of alkali metal refractory compounds for methanol dehydrogenation to water - free formaldehyde
甲醇脱氢制甲醛反应中碱金属难熔盐的催化性能研究 |
| 8. | Effect of alkali metals addition on the interaction between active constituents and alumina support of ptsn catalysts for dehydrogenation of propane
碱金属离子对丙烷脱氢催化剂中活性组分与载体间作用的影响 |
| 9. | The factors which influence the mechanical strength of the catalyst for ethylbenzene dehydrogenation to styrene with low potassium were discussed
摘要考察了各种因素对低钾乙苯脱氢制苯乙烯催化剂机械强度的影响。 |
| 10. | The catalyst for ethylbenzene dehydrogenation with high mechanical strength was prepared by optimizing chemical composition and adjusting preparation condition
实验结果表明，通过优化催化剂的化学组成，改进催化剂的制备条件，完全可以开发出机械强度好的低钾乙苯脱氢催化剂。 |
