| 1. | The rate of curing and consequently the rate of heat generation increase with the temperature .
固化速度，因而还有放热速度，都随温度而增加。 |
| 2. | While the curing speed of intra - gallery was slower than that of extra - gallery , exfoliation never happened
当蒙脱土层间的固化速度小于层外固化速度时，则不能。 |
| 3. | The fineness of fly ash influences on the solidifying velocity and coating film performance of polyurethane waterproof coating
粉煤灰的细度对防水涂料的固化速度和涂膜性能都有影响。 |
| 4. | By variation of curing agents of epoxy and modifier of clay , the different curing speed of intra - gallery and extra - gallery could be obtained
通过调节有机插层剂和固化剂，可以获得不同的层间和层外的固化速度。 |
| 5. | The resin produced by the flame - retardant products with high strength and mechanical properties , thermal deformation temperature , curing speed , and good soak
该树脂所生产制品具有很高的阻燃性能和机械强度，热变形温度高，固化速度快，浸透性好。 |
| 6. | Results showed that temperatures have different effects on the curing speed of resin , the rate of moisture transmission , the degree of plastic melting and the degree of wheat straw decomposition
结果表明，热压温度对板坯中胶黏剂的固化速度、水分传递速度、塑料熔融程度、麦秸分解程度等都有不同程度的影响。 |
| 7. | Tightsen uv adhesives can be used for bonding , sealing , encapsulating of glass , plastic etc . . cure in seconds , when exposed to uv light soures , with high shear strength and excellent optical charactors
泰盛uv胶系列产品使用方便、固化速度快、粘接强度高，具有良好的光学性能，可用于粘接、密封、固定和填充，适用基材广泛，如玻璃、金属、塑胶等。 |
| 8. | Xt - p1007 unsaturated polyester resin is reactive flame retardant resin , heat distortion temperature , curing speed , good soak and toughness , both major requirements for flame - retardant and high mechanical strength requirements pultruded products
P1007不饱和聚酯树脂是反应型阻燃树脂，热变形温度高，固化速度快，优良的浸透性和韧性，主要应用于既要求阻燃又要求机械强度高的拉挤产品。 |
| 9. | It was found that exfoliation of clay occurred when the curing speed of intra - gallery was faster than that of extra - gallery even the epoxy / clay compositions were cured at any temperatures , for any time and with any types of curing agents
研究表明，当蒙脱土层间的固化速度大于层外固化速度时，采用不同的固化剂，固化不同时间，在不同的温度下固化都可以得到剥离型的环氧/蒙脱土纳米复合材料。 |
| 10. | The results show that the gel time of the resol prepared in this paper is much longer than that of resol catalyzed with normal alkali such as ammonia and it is more stable when temperature is under 160 ; while temperature exceeds 160 , it cures very fast
结果表明，合成的酚醛树脂中有大量醚键，常温下它的凝胶时间很长，固化速度慢，温度大于160后，醚键分解产生甲醛，促进固化，凝胶时间迅速减小，固化很快。 |
