×

内拉伸 meaning in Chinese

in-draw

Examples

  1. If you want to align a control within a cell , or if you want a control to stretch within a cell , use the control s
    若要在单元格中对控件,或在单元格内拉伸控件,请使用控件的
  2. Based on the hot tensile test results , there exists a cooling rate at which a minimum reduction in area occurs and the hot ductility of the sn - doped steel is worse than that of the sn - undoped steel . when the cooling rate is lower or higher than 10 / s , the hot ductility is increased
    连续冷却到750 800范围内拉伸时,存在一个冷却速率( 10 s ) ,以这个冷却速率进行冷却,试样的断面收缩率最小,热塑性最差;当冷却速率大于或者小于这个冷却速率时,试样的断面收缩率均会增大,热塑性增强。

Related Words

  1. 反向拉伸
  2. 流动拉伸
  3. 拉伸斜角
  4. 拉伸模
  5. 拉伸区
  6. 拉伸速度
  7. 拉伸弯曲
  8. 拉伸破坏
  9. 拉伸系数
  10. 拉伸纤维化
  11. 内拉切削
  12. 内拉山
  13. 内拉伸〔在长丝变形加工时
  14. 内拉伸变形丝
PC Version

Copyright © 2018 WordTech Co.