×

拉伸速度 meaning in Chinese

tension speed

Examples

  1. At the same temperature , the as - cast lead brass has the finer prolongation at the higher velocity
    在温度相同条件下,在较高的拉伸速度下获得了大伸长率。
  2. We first expand the nonlinear temperature - dependent convective and radiative heat transfer coefficient about the ambient temperature by taylor - series method , and then the crystal temperature and the pull rate as well as the bulk melt temperature are determined by the perturbation techniques in a simply analytical manner
    分析之过程为首先将随温度变化之对流系数及辐射系数做泰勒级数展闭,再以摄动理论之技巧,同时求解晶圆棒之温度、拉伸速度及溶解液之温度。
  3. It adopts pc computer control , the high accuracy force value sensing test system , step - motor direct driving ball threaded screw methods it may set arbitrary numbers for the parameters such as gripped sample length stress rate , test times etc . the testing results would be output in forms of chinese characters reporting statistics through the printer
    采用pc机控制,高精度力值传感测量系统及步进电机直接驱动滚珠丝杆方式.对夹持试样长度.拉伸速度.实验次数等参数均能任意设定.测试结果由打印机输出
  4. It adopts pc computer control , the high accuracy force # 118alue sensing test system , step - motor direct driving ball threaded screw methods it may set arbitrary numbers for the parameters such as gripped sample length stress rate , test times etc . the testing results would be output in forms of chinese characters reporting statistics through the printer
    采用pc机控制,高精度力值传感测量系统及步进电机直接驱动滚珠丝杆方式.对夹持试样长度.拉伸速度.实验次数等参数均能任意设定.测试结果由打印机输出
  5. Through the strong pulling tests of four kinds of synthetic fiber filter cloth , the mechanical performance index of the filter cloth in dry and wet conditions were measured , the influence of various pulling speeds on the fracture strength and the fracture tensile rate of the filter cloth was derived . it was concluded that the stress of the filter cloth could relax when it was beyond the yield point
    通过4种合成纤维滤布的强力拉伸试验,测得了滤布在干、湿两种状态下的力学性能指标,得出了不同拉伸速度对滤布断裂强度和断裂伸长率的影响,同时指出当滤布的应力超过屈服点时,会出现应力松驰现象。

Related Words

  1. 反向拉伸
  2. 流动拉伸
  3. 拉伸斜角
  4. 拉伸模
  5. 拉伸装置
  6. 拉伸区
  7. 拉伸弯曲
  8. 拉伸破坏
  9. 拉伸系数
  10. 拉伸纤维化
  11. 拉伸丝束
  12. 拉伸松弛模数
  13. 拉伸塑性
  14. 拉伸损坏
PC Version

Copyright © 2018 WordTech Co.