English translation for "铜镀层"
|
- copper coating
copper plate
Related Translations:
镀层: cladding material; film◇镀层钢板 [冶金学] clad steel sheet; coated steel; 镀层金属 [化学] coated metal 化学镀层: chemical depositchemical platingelectroless deposit 镉镀层: cadmium coatercadmium coating 镀层试验: inspection of coating 电化学镀层: electrochemical plating
- Example Sentences:
| 1. | The plastics matrix might be exposed with under - coarsing . the cracks might appear on the coating with over - coarsing . ( 2 ) the thickness of copper coating should be over 5m for preventing coating wrinkle
( 2 )电镀铜时铜镀层必须具有一定的厚度，不应低于5林m ，防止镀镍后镀层起皱，从而影响镀层与基体的结合力。 | | 2. | It has been pointed out that , with the development of microelectronics , the electroplating of copper has been currently focused on , owing to its engineering significance
结合铜在微电子工业中的应用，综述了硫酸盐镀铜中铜的电沉积机理、铜镀层微结构、添加剂对铜电沉积过程的影响以及铜电沉积初期行为方面的研究进展。 | | 3. | The good adhesion of zinc coating can be obtained . 3 . pyrophosphate copper electroplating is conducted by ammonium citrate as a auxiliary complexing agent at around 40 , the narrow range of current density can
3 .焦磷酸盐镀铜时采用柠檬酸铵作为辅助配合剂,温度控制在40左右,电流密度范围较窄,控制在1 . 0a . dm ~ ( - 2 )左右,电镀时间较长,无法达到无孔状态,所以必须采用酸性镀铜加厚铜镀层。 | | 4. | ( 1 ) first , metallizing abs plastics surface by chemical coarsing , metal ion absorption , metal ion reducing and chemical copper - plating . then , the copper - coating was thickened by electroplating in order to improve adhesion between following - coating and plastics matrix , and nickel was preplating . finally , ni - sic composite was plated
( 1 )通过反复实验，确定工艺流程：首先通过粗化、敏化、活化和化学镀铜，使塑料表面金属化，再电镀铜加厚铜镀层，增强后续镀层与塑料基体的结合力，然后预镀镍，最后电镀ni ? sic复合镀层。 |
- Similar Words：
- "铜钉固定" English translation, "铜钉固定的" English translation, "铜钉合金" English translation, "铜鼎" English translation, "铜锭" English translation, "铜端环" English translation, "铜锻" English translation, "铜锻造" English translation, "铜阀门" English translation, "铜矾" English translation
|
|
|
