| 1. | Test method for resistance of adhesive bonds to chemical reagents ? metal to metal
胶粘剂耐化学试剂性能的测定方法金属对金属 |
| 2. | B connections for general use and fluid power - ports and stud ends with thread - stud ends with metal - to - metal sealing type b
液压管接头用螺纹油口和柱端金属对金属密封柱端 |
| 3. | In addition , the effect of transition metal such as ru , mo , ff and sn on the methanol electro - oxidation is also discussed here
此外还测试了ru 、 mo 、 w和sn等过渡金属对甲醇的电氧化影响。 |
| 4. | Metal - to - metal seating means not best choice for frequent operation . bubble - tight seating should not be expected with metal - to - metal design
金属对金属阀座意味着不适用于频繁操作。金属对金属结构也不适用于无气泡阀座。 |
| 5. | Connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - part 1 : threaded ports
一般用途和流体动力用连接件.带弹性体密封件或金属对金属密封件的iso 261螺纹的孔口和螺柱端.第1部分:带螺纹的孔口 |
| 6. | The seat ring uses the sealing face inlaid with ptfe , so has dual seals of ptfe to metal and metal to metal , the ptfe sealingface also acts as removing the dirt on the wedge disc
金属对金属密封的阀门，阀体外部设有注油脂结构，油脂通过注脂器、阀座进入阀门密封面，使阀门达到零泄漏。 |
| 7. | For the valve with the metal to metal seal , there is grease injector outside of it , grease gets into the sealing face through the injector and the seat ring to have the valve up to null leak
金属对金属密封的阀门，阀体外部设有注油脂结构，油脂通过注脂器、阀座进入阀门密封面，使阀门达到零泄漏。 |
| 8. | Connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - part 2 : stud ends with elastomeric sealing type e
流体动力用和通用连接件.带iso 261螺纹，带有弹性体或金属对金属密封件的端口和螺柱断头.第2部分:带弹性密封的螺柱端头 |
| 9. | Connections for general use and fluid power - ports and stud ends with iso 261 threads with elastomeric or metal - to - metal sealing - part 2 : stud ends with elastomeric sealing type e
一般用途和流体动力用连接件.带弹性体密封件或金属对金属密封件的iso 261螺纹的孔口和螺柱端.第2部分:带弹性体密封件的螺柱端e型 |
| 10. | At last , we used ferrite to avoid the disturbance form metal to the electromagnetic field , and the magnetic antenna can be fixed on the metal directly , then that ensured the running reliability of the system
最后采用铁氧体防大块金属对电磁场的干扰，使得磁性天线可以安装在金属表面，从而保证了系统稳定可靠的工作。 |
