English translation for "边界层分离"

boundary layer separation
boundary-layer separation
flow separation
separation of boundary layer

Related Translations:

边界层摩擦:  boundary layer friction

边界层现象:  boundary layer phenomenaboundary layer phenomenon

边界层稳定:  boundary layer stabilityboundary layer stabilization

边界层模式:  boundary layer model

边界层特性:  boundary layer characteristic

边界层水流:  boundary-layer flow

边界层形成:  boundary layer build-up

边界层过渡:  boundary layer tra itionboundary layer transition

过度边界层:  boundary layer; transition

行星边界层:  planetary boundary layer (pbl)

Example Sentences:

	1.	The micro shear stress sensor which based on the smart skin for boundary - layer separation point detection of delta wing has been explored in this paper 本文就以用于实现三角翼边界层分离点检测的面向灵巧蒙皮的微型剪应力传感器为对象展开研究。
	2.	The effects of the two methods of " sucking - spouting " water and flow - deflection on the horizontal circulation were tested experimentally in a 50cm - width flume with a spur dike placed as a barrier 可以把主流的一部分能量传给边界层内靠近壁面的流体质点，使之加速，从而达到防止边界层分离的目的。
	3.	Horizontal circulation at the inlet of the upper approaching channel of three gorges project can affect the safety of navigation . boundary layers will separate along a curved dike causing horizontal circulation regions which affect the overall flow field and increase sedimentation 类似的由于流动边界出现凸出障碍物引起边界层分离，导致回流发展、流态恶化，造成泥沙淤积等一系列问题的情况，在水利、航道及电站等工程中普遍存在。
	4.	According to the theory of boundary layer and the important of boundary - layer separation point detection of delta wing , the measuring principle and structure scheme of various system alternatives based on mems technology have been discussed , selecting the prototype of better workability . base on the master piece model of micro shear stress sensor 首先，结合空气动力学的边界层原理，针对三角翼边界层分离点检测在实现主动气动控制方面的重要性，讨论了光学式、电容式和热敏式微型剪应力传感器的测量原理和结构方案，选取适合加工条件的微型剪应力传感器样件。
	5.	According to the comparison between simulation results and laboratory measurements , this paper reaches the conclusion that the negative pressure region in convex boundary ( including broken line gradient ) not only caused by boundary layer separation , but also especially caused by centrifugal force which is the result of convex boundary 根据数值计算与模型试验结果的比较，得出具有凸形曲面边界（包括折面底坡）负压区的存在不仅是边界层分离所致，边壁弯曲使过流产生的离心力也是产生负压的重要原因的结论。
	6.	Firstly , based on n - s equation , the momentum differential equation （ contained centrifugal force ） is derived by simplification in boundary layer and then integrates the differential equation over the thickness of the boundary layer , the momentum integral equation is deduced . the dimensionless centrifugal factor is introduced , then the solution of the momentum integral equation is obtained . the dimensionless group is introduced to determined separation of boundary layer 本文首先根据粘性流体力学的一般方程，通过在边界层内进行量级比较，在所限定的范围内得到了含有离心力的边界层动量微分方程并给出其满足的边界条件，然后对该微分方程在边界层内积分得到离心泵叶轮边界层动量积分方程，在求解过程中引入了无量纲离心因子，并作了相应合理的假设，得出积分方程解的一般表达式，并引入以边界层动量损失厚度为主要特征量的无量纲参数对边界层分离进行评价。

Similar Words：

"边界层发展" English translation, "边界层法" English translation, "边界层方程" English translation, "边界层方程式" English translation, "边界层分布" English translation, "边界层分离现象" English translation, "边界层分离阻力" English translation, "边界层风洞" English translation, "边界层光电池" English translation, "边界层过渡" English translation