Mobile
Log In Sign Up
Home > chinese-english > "轧制力" in English

English translation for "轧制力"

draught pressure
roll force
roll seperating force


Related Translations:
轧制:  [冶金学] roll down;roll;rolling◇轧制薄板 rolled sheet metal; 轧制材 rolled stock; 轧制成形 [冶金学] roll forming; 轧制钢 rolled iron; rolled steel; 轧制钢板 rolled plate; rolled sheet material; 轧制钢材 rolled steel;
轧制裂缝:  rolling crack
轧制工艺:  rolling mill practicerolling technology
带钢轧制:  strip milling
轧制梁:  rolled beam
轧制压力:  draught pressurepressure of rollingroll pressurerolling pre urerolling pressure
型钢轧制:  rolling of sectional ironrolling of sectionssection rolling
轧制管材:  drawn and rolled tuberolled tube
线材轧制:  rod rollingwire millingwire rod millingwire-rod milling
轧制时间:  pass timerolling time
Example Sentences:
1.Resistance strain gauge rolling force measuring instrument
电阻应变式轧制力测量仪
2.Adaptive modification of the rolling force prediction
轧制力预报的自适应修正
3.Magnetoelastic rolling force measuring instrument
磁弹性式轧制力测量仪
4.The results of the calculation are very accurate when compared with the experimental results
采用该公式计算出的轧制力与实验值基本符合。
5.Distributed rolling force signal acquisition and fault diagnostic system based on field bus
基于现场总线分布式轧制力信号采集及故障监测系统
6.Abstract : the artificial intelligence method to setup and control rolling force is researched
文摘:研究了轧制力设定控制的人工智能实现方法。
7.The application of the attached type ergometric sensor for monitoring the rolling force of the heavy plate mill
附着式测力传感器在大型轧机轧制力监测中的应用
8.There are two kinds of method to measure the rolling force : stress measure and sensor measure
机械工程中测量轧制力的方法有两种:应力测量法和传感器测量法。
9.Simulated rolling force , temperature value and microstructure are of good agreement with the measured results
模拟得到的轧制力能参数、温度、组织分布与实测数据基本一致。
10.On - line results indicate that the predicted results are more accurate with a relative error within 3 %
应用结果表明,采用本方法预报轧制力时精度优于传统的数学模型,相对误差可以控制在3 %以内。
Similar Words:
"轧制件形状均匀性" English translation, "轧制角钢的蝶式孔型" English translation, "轧制角钢用蝶式孔型" English translation, "轧制孔型的过充满" English translation, "轧制宽度" English translation, "轧制力矩" English translation, "轧制梁" English translation, "轧制裂缝" English translation, "轧制裂纹" English translation, "轧制鳞皮" English translation