English translation for "跑合"
|
- [ pǎohé ]
breaking-in
running-in
Related Translations:
跑来跑去: run hither and thither [to and fro; here and there]; be ever coming and going; run back and forth; kick about 跑火: runout; leak-out; running away
- Example Sentences:
| 1. | During the simulant test of gears running - in , the wear type of samples are changed . the rules of the variety are gained
摘要通过齿轮副跑合的模拟试验，得出齿轮副在跑合过程中磨损形式的转化规律。 | | 2. | On the first application , clean the compressor completely , run with this oil for several hours , drain it completely and refill this oil
第一次使用本润滑油时，须将压缩机润滑系统清洗干净，推荐用本润滑油跑合冲洗一次放净后，方可使用。 | | 3. | Applying the idea of unit control and regional division , we design a running - in machine system to study on the cell positioning and position measurements
摘要采用基于“单元控制，分区定位”的思想，构建了跑合机系统，研究多单元的定位测量问题。 | | 4. | The wear behavior and the morphology of worn surface of samples were analysed . the result showed that cu - ( al2o3 ) n composite was excellent at wear resistance
材料的磨损包括跑合阶段和稳态磨损阶段，跑合磨损阶段磨损量变化迅速，而稳态磨损阶段磨损量变化缓慢。 | | 5. | The influence law of gear ' s bending stress affected by nominal pressure angle and technological angle of tooth profile has been summarized and obtained a conclusion that the maximum bending stress before running in period occurred at the waist place of the tooth , thus provided a theoretical foundation for the design and application of double arced gears
总结了名义压力角和齿形工艺角对轮齿弯曲应力的影响规律，并得出跑合前最大弯曲应力发生在齿腰处的结论，为双圆弧齿轮的设计和使用提供理论依据。 | | 6. | As a new type gear transmission , double circular arc profile bevel gearing carries out its transmission by means of meshing between convex - concave tooth profile in both of the direction of tooth trace and the direction of tooth depth , so it has advantage of high load capacity , long service life , easy forming hydrodynamic oil film between teeth as well as high quality of running - in etc . therefore , more attention has been paid to its application and research in recent years
作为一种新型齿轮传动方式，双圆弧弧齿锥齿轮传动不论在齿线方向、还是在齿高方向，均为凸、凹齿廓相啮合，因而它比一般的弧齿锥齿轮传动的承载能力高，使用寿命长；并且在啮合过程中两齿面间容易形成润滑油膜，具有良好的跑合性能，所以对它的应用和研究日益受到人们的重视。 | | 7. | In order to test resistance parameters and general properties of the idler automatically and continuously , by using " the rotating inertia method " to construct mechanical drive control system , theory of realizing double parameters measurement of the idler was discussed , and by using pressure transducer parts to control the experiment pressure , method of examining the idler was also put forward
摘要为实现对托辊阻力参数及综合性能的自动化、连续化的测试，论述了利用理论力学中“转动惯量法”构建机械传动控制系统，实现托辊阻力双参数测量的原理，阐明了采用压力传感器部件控制试验压力，达到托辊产品在规定压力下跑合要求的检测方法。 | | 8. | In this task , a test _ bed for engineering vehicles was developed based on virtual instrument . the whole system comprised 5 parts : the checking of running velocity , which was gotten on the test bed through the vehicles simulating real road running ; the temperature checking of the important points on the transmission system ; the temperature checking of the circling cooling water on the exit port of dynamometers ; the control of the loading power . which was given to vehicles by the power measuring machine ; the control of the total test - run time
本课题开发的基于虚拟仪器的工程机械跑合试验台，其测量和控制参数有：行驶速度检测(车辆在跑合试验台上模拟路面的行驶速度) ；传动系温度检测(试验车辆传动系主要部位多点温度) ；冷却水温度检测(测功机循环冷却水出口温度) ：加载功率控制(测功机施加给车辆的载荷) ；跑合时间控制(试验车辆在试验台上加载跑合的总时间) 。 | | 9. | Comparing with the traditional test method which has many limitations , the engineering vehicle testing system has many advantages , such as the higher test efficiency and no potential accident in road . therefore , the successful development of the system do have significance in both economy and society
工程机械(平地机、装载机)跑合试验台检验，来替代传统的道路磨合和可靠性试验，提高了生产效率、防止了道路试验的事故隐患，在经济效益和社会效益两个方面，都具有很大意义。 |
- Similar Words：
- "跑过四分之一英里后他就领先三个马身那么远" English translation, "跑过头" English translation, "跑过下面" English translation, "跑旱船" English translation, "跑号" English translation, "跑合的" English translation, "跑合面" English translation, "跑合磨损" English translation, "跑合期" English translation, "跑合期磨损" English translation
|
|
|
