| 1. | Soiled samples need aging before cleaning to complete soil fiber interactions .
沾污的样品在清洁之前须经过一段老化时间，使其完成污垢与纤维相互作用。 |
| 2. | Standard test method for time - to - failure of plastics using plane strain tensile specimens
使用平应力拉伸样品测定塑料老化时间的标准试验方法 |
| 3. | Standard test method for creep and time to failure of adhesives in static shear by compression loading wood - to - wood
用压缩负荷静剪切法法测定胶粘剂蠕变和老化时间的标准试验方法 |
| 4. | It was found that the linear characteristic of two kinds of conductive silicone rubber was improved with the increase of aging time
结果表明， 2种线性导电硅橡胶的线性特性是随自然老化时间的延长，其线性提高。 |
| 5. | The tc bit is set by the root for a period of max _ age + forward _ delay seconds , which is 20 + 15 = 35 seconds by default
根桥设置的tc位所经历的时间20 （老化时间） 15 （转发延迟时间） 35秒，再加上根桥的转发延迟时间15秒，所以一般来说默认的收敛时间为50秒。 |
| 6. | The results showed that sequence and way of feeding , reaction temperature , time of aging , stirring speed and drying and calcinations had remarkable influence on the pore structure
结果表明，加料顺序、加料方式、成胶温度、老化时间、搅拌速率以及干燥焙烧等因素对孔结构均有明显影响。 |
| 7. | Theory analysis and experimental results show that the rate of the unqualified product can be decreased and the life time can be lengthened when the aging time , set scientifically
理论分析与试验数据都表明，科学设定老化时间，对降低服务器产品的出厂不良率，提高服务器产品的使用寿命都起着关键性作用。 |
| 8. | The field tests have been performed to evaluate the ultraviolet resistance of geosynthetics used in different engineering conditions ; and the aging rule of geosynthetics was obtained
摘要为了解土工合成材料的抗紫外线老化的能力，对土工合成材料进行了户外现场模拟老化试验，得到了材料抗拉强度随老化时间变化的规律。 |
| 9. | This paper introduces the aging theory that can be used in the production of workstation , and points out that the rate of the unqualified product is influenced by the setup of the aging time
摘要本文介绍了服务器生产过程中，老化拷机这个生产工艺过程的理论，说明了老化时间设定对产品出厂不良率水平的影响及老化时间的推算方法。 |
| 10. | At the same time , the results show that the minimum pd quantity and its discharge numbers also add along with the aging time increasing . and the craggedness degree of - q figure of pd becomes steep along with ageing time too
局部放电的最小放电量随着老化时间的增大其值也逐渐增加，而且放电次数也不断增加，因此，这也可以作为一个特征量来进行绝缘监测。 |
