English translation for "粘结相"
|
- binder phase
binding phase
Related Translations:
粘结桥: adhering bridgebonded bridge 粘结胶泥: bonding cementbonding putty 粘结法: bonding processmull technique 血小板粘结: platelet stickness
- Example Sentences:
| 1. | Secondly , appropriate refiring change ratio is gained by designing compound inorganic binder . effects of additional inorganic constituents on properties of trf were studied
从提出复合无机粘结相的概念,实现了对重烧变化率的可控调整。 | | 2. | In w - mo alloys with different contents of w and mo , good coherence between the grains were achieved and they mainly existed as mechanical mixtures
不同组成配比的w - mo合金中的w晶粒与mo晶粒主要以机械混合的方式交错分布，通过形成的粘结相紧密粘结。 | | 3. | It is indicated that since different kinds of iron ores have different self - characteristics , the sintering intensity of binding phase and its dependence on basicity have obvious difference
结果表明：不同种类的铁矿粉由于其自身特性的不同，所生成的烧结粘结相的强度以及随二元碱度的变化规律有明显差异。 | | 4. | In sintering process , for melted mineral fines bind unmelted core ores when cooled , the self - intensity of binding phase in iron ores is one of the basic indexes to estimate sintered binding status
摘要在铁矿粉烧结过程中，熔化的矿粉在冷却过程中起著粘结周围未熔矿粉的作用，因此这一粘结相的自身强度是衡量烧结矿固结状况的重要指标之一。 | | 5. | With eight kinds of iron ores , the self - intensity characteristic of binding phase was studied at the same temperature and different basicities and their influence factors were theoretically discussed
运用这一新概念，以八种常用的铁矿粉为对象，在固定温度、改变碱度的条件下进行了粘结相自身强度特性的实验研究，并对影响铁矿粉粘结相自身强度的因素进行了理论分析。 | | 6. | The cementing metal and carbon nanotubes ( cnts ) were added into the milled solid solution of w - c . by ball milling not only the additives were well dispersed in the the powder but also the size of cementing metal crystal was reduced , which was in favor of the reinforcement of alloys
在w _ ( 50 ) c _ ( 50 )球磨制得的粉体中直接加入粘结金属和碳纳米管，利用高能球磨混合，提高它们在粉体中的分散程度的同时可以进一步减小粘结相的晶粒尺寸，有利于提高材料性能。 | | 7. | The fractorgraphy analysis show that in the layer rich in w and mo , the feature of fracture is brittle fracture which follow the bordline of crystal . in sections rich in the felt metal , the feature of fracture is ductile fracture . in w - mo layer , the feature of fracture are brittle fracture and some ductile fracture
断口形貌特征研究表明，富w区、富mo区主要为沿粒界脆性断裂；粘结金属发生韧性断裂； w - mo混合区为颗粒的沿粒界脆性断裂和粘结相的韧性断裂的混合型断裂；富ti区为典型的穿晶解理断裂； mo - ti混合区以穿晶解理断裂为主，颗粒边界表现出准解理断裂特征。 | | 8. | It is found that , the sintering process of w - ni - fe - cu alloy was a typical liquid - phase process , which including particle rearrangement stage , dissolving - precipitation stage and solid - phase sintering stage . cu plays an important role in the particle rearrangement stage , while fe can promote the densification by forming ni - fe - w bonding - phase . ni can not only form the bonding - phase , but also enhance the diffusion between the w grains
研究表明， w - ni - fe - cu合金的液相烧结致密化经历了颗粒重排、溶解-析出和固相烧结等三个阶段， cu仅在颗粒重排阶段起主导作用； fe主要在溶解-析出阶段通过形成ni - fe - w三元粘结相来促进w合金的烧结致密； ni不仅参与形成ni - fe - w三元粘结相，并且在w晶界上通过与w的互扩散促进了固相w晶粒的粘合。 | | 9. | The recent research status on tungsten heavy alloys was reviewed . the methods to improve the properties of tungsten alloys , including the changes of tungsten particle size , component , content of matrix and the improvements of sintering technics , were also discussed in details . at the same time , some advanced overseas penetrators were introduced and research directions of tungsten alloy materials were pointed out in this paper
主要介绍高密度钨合金穿甲弹材料侵彻性能的国内外研究发展状况,从改变合金中钨颗粒性质、粘结相组成与含量,以及结合工艺改善的角度,总结目前国内外改善高密度钨合金侵彻性能的主要途径,并对当前国外先进钨合金穿甲弹产品的材料成分、制备工艺及侵彻效果进行了简要介绍和分析;同时针对国外穿甲弹的研究概况和发展趋势,提出我国今后研究和开发新型高侵彻性能钨合金穿甲弹的主要研究方向。 |
- Similar Words：
- "粘结土" English translation, "粘结网络" English translation, "粘结物" English translation, "粘结纤维" English translation, "粘结线" English translation, "粘结性" English translation, "粘结性衬垫部件的规范" English translation, "粘结性的" English translation, "粘结性煤" English translation, "粘结性耐火粘土" English translation
|
|
|
