| 1. | If the tubing is to remain in a place, the end is clamped . 如果要固定导管,就要夹住管端。 |
| 2. | The total-head tubes should be cut off square, and their length is immaterial . 总压管端应加工平整,至于它们的长度则无关紧要。 |
| 3. | Usually the rake body makes the static readings high, and by shortening the tipstatic-orifice distance the error can be eliminated . 一般排管架使静压读数偏高,缩小管端静压孔的距离可以消除这个误差。 |
| 4. | Loose hubbed cast iron pipe flanges for lapped pipe end 管端翻边带颈松套铸铁管法兰 |
| 5. | Specification for lap joint flange pipe end applications 搭接法兰管端规范 |
| 6. | First the pipe facing machine is inserted into the pipe end 首先将管道坡口机插进管端。 |
| 7. | Rech . aircraft fluid installations . plug - in unions , tube end . 飞机液压装置.管端插入接头 |
| 8. | Laboratory glassware ; glass tube ends with round thread 实验室玻璃仪器.带圆螺纹的玻璃管端 |
| 9. | Standard specification for lap joint flange pipe end applications 搭接法兰管端设备标准规范 |
| 10. | Plug - in unions , tube end . iso thread profile and tolerances 管端插入式联管节. iso螺纹牙形和公差 |