English translation for "端截面"
|
- end section
end-section
Related Translations:
圆截面: circular cross-sectioncircular section 变截面: reduce sectiontapered cross sectionvariable cross sectionvariable cross-sectionvariable sectionvariable-cross-section 复合截面: compound cross sectioncompound cross-sectionmultiple sections 截面厚度: section thicknesssectional thicknessthickness of section 宏观截面: macroscopic across sectionmacroscopic cross section 截面研究: cross-sectional research 中性截面: neutral cro sectionneutral cross sectionneutral cross-section 截面直径: diameter of section
- Example Sentences:
| 1. | Friendly pc converter - preview videos on pc , select parts you want to convert , alter quality
友好的pc端截面? ?影片预览，区段转换，画质调整。 | | 2. | The femoral head ostectomy is a last resort procedure and generally is not recommended for mild cases of arthritis
股骨端截面手术是一种不得已的手术，通常不会被用在轻度关节炎上。 | | 3. | It is found that the levitation force can be remarkably enhanced by choosing optimum value of r or d , and the possibility of this enhancement for spherically curved reflectors is the largest
发现通过选择最优化的r或d值，可以显著提高声悬浮力，并且谐振模式数越小，反射端截面半径越大，提高的程度就越大。 | | 4. | Concave reflecting surfaces of spherical cap , paraboloid and hyperboloid of revolution are investigated with regard to the dependence of the levitation force on the section radius rb and curvature radius r ( or depth d ) of the reflector
针对球面、旋转抛物面和旋转双曲面三种形状的凹面反射端，系统研究了悬浮力与反射端截面半径r _ b和曲率半径r (或深度d )之间的本征关系。 | | 5. | Based on conjunction theory , the models for gear manufacturing is developed , and the equation of the gear surface is gained by the equation of rack cutter . the contact line in manufacturing and the tooth profile of the gear is also discussed based on the equation of the gear surface
本文首先基于齿轮啮合原理,建立了齿轮加工的模型,由刀具曲面方程推导出被加工齿轮的齿面方程,并进一步推导出齿轮端截面的齿廓方程和齿轮刀具接触线方程。 | | 6. | Firstly , the shear and normal stresses of tapered members under the transverse load or axial load are analysed , and the stresses formulas are obtained which are different from those of the prismatic ones . secondly , research is done on the in - plane inelastic stability of tapered members under axial loads about strong axis and weak axis . a new design method is suggested in which the tapered member is equivalent to the prismatic member with the cross - section at the larger end of the tapered member
同时由分析可知，目前采用的将变截面压杆按照弹性极限荷载等效的原则等效成以小端截面为准的等截面压杆的设计方法，在弹塑性阶段低估了压杆的承载力，即弹性等效的压杆在弹塑性阶段并不等效，实际变截面压杆的承载力比等效的等截面压杆的承载力要高。 | | 7. | Tow speciments of prestressed fabricated beam - column subassembly were tested under reversed cyclic loading . experimental studies were carried out to investigate the strain distribution , failure mechanism and load - bearing capacity on the beam - column connections , as well as ductility , hysteresis curves energy dissipation , displacement restoring capacity of full pc speciments
本文通过两榀预压装配式梁柱组合体在低周反复荷载下的试验，了解了预压装配式框架梁端截面应变分布、破坏机理和极限承载能力；探讨了全预应力配筋截面延性特征、滞回性能、耗能能力和变形恢复能力。 | | 8. | 3 . a space bond slip relation of reinforcements in either end of a member is proposed , based on one - dimensional bond slip model of reinforcements proposed by teng zhiniirmg from tsinghua university , the first - time loaded ascending stage ? curve of which model is modified as the line which parameters are not changed so as to simply the computation . the bond , slip is regarded as the boundary nonlinearity of a member
3 、采用清华大学滕智明建议的一维钢筋粘结滑移恢复力模型，但从简化计算的角度出发，将首次加载的上升段曲线改为直线，并假定构件端部的诸多纵向钢筋的滑移服从平截面假定，考虑由节点锚固区粘结滑移引起的构件端截面轴向和两转角附加变形。 |
- Similar Words：
- "端接头及槽轮" English translation, "端接网络" English translation, "端接装置" English translation, "端接组件" English translation, "端接耦合" English translation, "端截头" English translation, "端节" English translation, "端节点" English translation, "端结" English translation, "端界灯" English translation
|
|
|
