| 1. | Standard test method for steady - state thermal transmission properties by means of the thin - heater apparatus
薄加热设备稳态热传导特性的标准试验方法 |
| 2. | En iso 8497 thermal insulation . determination of steady - state thermal transmission properties of thermal insulation for circular pipes
绝热.圆管绝热稳态热传导性能测定 |
| 3. | Steady heat conduction analysis of functionally gradient material plate with temperature - dependent properties under convective heat transfer boundary
换热边界下变物性梯度功能材料板稳态热传导分析 |
| 4. | 3 the analytical solution of steady - state temperature field with internal joule heat generation for sound structure is firstly investigated
3 、研究了在焦耳内热源条件下，无缺陷结构稳态热传导问题，并获得了其解析的求解方法。 |
| 5. | It is difficult to achieve the analytical solution of temperature field with internal joule heat generation under steady state electric field , especially when the distribution of the joule heat is complicated
摘要在稳恒电场条件下，尤其是当焦耳热分布情况很复杂时，求解含焦耳热源的稳态热传导问题解析解具有一定的困难。 |
| 6. | The problem of monitoring the wear - line of a blast furnace is treated as the inverse problem of the static heat conduction system , and the latter has been turned into the optimization of the squared residual of the measured and calculated temperature at the sensor locations
摘要把确定高炉炉缸炉底热侵蚀边界归结为稳态热传导方程的反问题，并转化为极小化在若干测温点处由设定侵蚀边界对应的偏微分方程边值问题求得的温度与实测温度之间误差的优化问题。 |
| 7. | The article set up 2 - dementional steady heat conduction model and equations based on buried channel waveguide , and solved the equations by separating variables method . using mathcad , 2 - d temperature distribution and the influenced refractive index distribution by thermo - optic effect were plotted in waveguide section area
本文先以埋入式沟道波导为例，建立了二维稳态热传导方程模型，用分离变量法推导了方程解，并用mathcad2000在波导截面上绘出了二维温度分布图和受到热光效应影响的折射率分布图。 |
| 8. | It applies an interval method to select element in the evolutionary structure optimization method ( eso ) , and recovers or deletes element by the “ birth and dead ” function of element . another method viewed as second order smoothing technique for suppressing the checkerboard patterns has been proposed based on the filtering function ’ s principle . then the above methods are applied to solve a temperature - controlling problem in the steady heat conducting field and a multi - objective topology optimization problem considering multiple load cases and coupled effect
本文基于ansysparametricdesignlanguage ( apdl ) ,提出渐进结构法中应用区间法进行单元的筛选,通过单元“生死”的功能实现单元的恢复与删除,根据滤波函数法原理提出修改的二阶棋盘格处理方法,并就稳态热传导温度控制问题,考虑热、力耦合的多载荷工况的多目标拓扑优化设计问题进行求解。 |
