English translation for "离心式喷嘴"
|
- swirler
Related Translations:
离心润滑: centrifugal lubrication 离心蒸发器: centrifugal evaporatordisc evaporator 离心花序: centrifugal inflorescence 平衡离心: equilibrium centrifugation 离心铸造: centre die castingcentre diecastingcentre spinningcentrifugal castingcentrifuge castingrotary castingrotational castingspun casting 离心搅拌机: centrifugal blender 离心澄清: centrifugal clarification
- Example Sentences:
| 1. | This " paper mainly researches on the humidifying property of the centrifugal nozzle with firing pin type , high pressure and little aperture
课题主要对撞针型高压小孔径离心式喷嘴的雾化加湿性能进行研究。 | | 2. | Its atomized parcel is so small that no drip is separated out . this kind of centrifugal nozzle has high humidifying efficiency and low energy cost , which could be used in many situations in textile factories such as directly humidifying in workshop and humidifying in air pipeline
撞针型高压小孔径离心式喷嘴的雾化粒子细小、无水滴析出、加湿效率高、耗能少，可直接向车间加湿，适用于纺织厂等多种应用场合。 | | 3. | When the water - air ratio increases , air ' s changing quantity of enthalpy and absolute humid will be enhanced . at last , the paper analyses the data from single factor experiment by mathematics method and gets relationship formulas about the nozzle flux , valid humidifying quantity and air ' s enthalpy changing quantity
最后，对上述单因素试验得到的数据进行数学分析，运用线性回归分析、多项式回归分析和非线性回归分析的数学方法，得到影响撞针型高压小孔径离心式喷嘴的喷嘴流量、有效加湿量和空气焙变量的数学关系式。 | | 4. | As to the work about theory analysis , at first , the paper describes the atomizing and humidifying process of the centrifugal nozzle with firing pin type , high pressure and little aperture and liquid physical properties . later , combining with the structure characters of this kind of nozzle , the paper studies on the theory of the atomizing and humidifying process by three phases , which is water film forming phase , water film falling into pieces phase , and heat and mass transfer between water and air phase in turn
理论工作方面，首先描述了撞针型高压小孔径离心式喷嘴的雾化加湿过程和液体的物理性质，然后结合撞针型高压小孔径离心式喷嘴的结构特点，将其雾化加湿过程分三个阶段进行机理上的研究，这三个阶段依次为液膜形成、液膜初次破碎及二次雾化、水与空气的热湿交换。 | | 5. | Based on the theory analysis and experiment work , the paper studies the humidifying property of the centrifugal nozzle with firing pin type , high pressure and little aperture . compared with the traditional air washer , the high efficiency and energy saving character of this kind of nozzle is stood out
课题从理论和试验两方面分析研究了撞针型高压小孔径离心式喷嘴的雾化加湿性能，并将其与传统喷水室加湿系统进行能耗比较，突出了撞针型高压小孔径离心式喷嘴高效节能的特点。 | | 6. | Through the special studies on impacts to atomizing and humidifying effect from such factors as the firing pin type , centrifugal structure , higher spraying pressure , less aperture , initial water temperature and original state of the air , some conclusions are obtained , such as : the centrifugal nozzle with firing pin type , high pressure and little aperture has bigger air eddy and atomizing angle . the spaying liquid has high velocity . the droplet is small , and the heat and mass transfer velocity is high
通过对撞针型结构、离心式结构、较高的喷水压力、较小的喷嘴孔径、喷水初温及待加湿空气初状态对雾化加湿效果的作用原理的重点分析，得到：撞针型高压小孔径离心式喷嘴具有较大的空气涡与雾化角，喷出的液体流速高、液滴小、水与空气传热传质速率高，撞针型结构提高了雾化加湿效率，高压小孔径的特点为雾化加湿提供了较大的能量，而喷水初温的升高会减小水的粘性力和表面张力，从而优化加湿效果。 | | 7. | As to the work about experiment study , at first , the paper makes certain the prominent affecting factors to the automating and humidifying property of this kind of nozzle by orthogonal experiment . by jicha analysis method and fangcha analysis method , the paper got that the nozzle aperture , the initial water temperature and the spraying pressure have prominent effect to the humidifying property while the effect of the original air state is small
试验工作方面，首先通过正交试验确定对撞针型高压小孔径离心式喷嘴雾化加湿性能影响显著的因素，运用极差分析法和方差分析法，得到喷嘴孔径、喷水初温和喷水压力对喷嘴的加湿性能影响显著，而待加湿空气初状态的影响相对较小。 | | 8. | Integrated the work on theory and experiment , the paper provides technical performance material at large about the automating and humidifying character of the centrifugal nozzle with firing pin type , high pressure and little aperture to the manufacture and user . with the valuable reference during the selecting the equipment and ascertaining the parameters , the users could select and control the humid parameter
课题的理论与试验两方面工作相结合，为撞针型高压小孔径离心式喷嘴的雾化加湿性能提供了较为详细的技术性能资料，为生产厂家和用户在设备选型和参数选择过程中，提供了有价值的参考，便于用户正确而经济地选择、控制湿度参数，有效调节喷嘴孔径、喷水初温和喷水压力的大小。 |
- Similar Words：
- "离心式喷气发动机" English translation, "离心式喷射阀" English translation, "离心式喷雾法" English translation, "离心式喷雾器" English translation, "离心式喷雾圆盘" English translation, "离心式起动机" English translation, "离心式起动开关" English translation, "离心式起动器" English translation, "离心式启动变阻器" English translation, "离心式启动开关" English translation
|
|
|
