English translation for "电磨"
|
- electric grinder
Related Translations:
电磨机: electric grinderelectrical grinding machine 磨具电磨: electric die grinder 移动式电磨机: portable elecric grinderportable electric grinder 手提电磨机: electric portable sanderelectrical grinding machine
- Example Sentences:
| 1. | Mainly used in the driving of electricity or wind - driver tools , applicable in fine buffing of inner hols orelbow pipes of work pieces
主要用于电磨机或风动工具上。适用于工件内孔、弯道的精抛等。 | | 2. | Safety of hand - held motor - operated electric tools . part 2 : particular requirements for grinders , polishers and disk - type sanders
手持式电动工具的安全.第2部分第3节:电磨抛光机和盘式砂光机的特殊要求 | | 3. | Safety of hand - held motor operated electric tools - part 2 : particular requirements for grinders , polishers and disk - type sanders ; amendment 1
手持式电动工具的安全.第2部分第3节:电磨抛光机和盘式砂光机的特殊要求.补充件1 | | 4. | The da electric tool works , the main products are sanding machine , hot air guns , lawn machines , electric grinding head , curve sawing , waxing machine
原大成电动工具厂，主要产品有砂光机、热风枪、草坪机、电磨头、曲线锯、打蜡机等。 | | 5. | After blanting resin abrasive cloth into small blocks , glue them into a disc , it can be equipped on electronic grinder or wind - driven tools so as to buffing and dry milling functions of inner holds or elbow pipes of metals work pieces
该产品选用树脂砂布冲成小块粘合而成，可装在电磨机、风动工具上，用于复杂金属件内孔及弯接处、焊疤的打磨、抛光。 | | 6. | The signals of sawing force with different cutting parameters were acquired by a piezoelectric force dynamometer in the process of sawing concrete , and the characteristics of the sawing force signals and the influence factors were analyzed
采用压电磨削测力仪和信号采集系统测量了不同锯切参数条件下的锯切力，分析研究了锯切混凝土过程的锯切力信号特征和影响因素。 | | 7. | We also studied the dynamic characteristics of cf / cu ( c ) - cu composites , the results show that , by the method of graphite is coated with copper , the coefficient of friction and the wear rates remarkably decreased . with the increase of the copper coated carbon fiber content , the wear rates of cf / cu ( c ) - cu composites is notably decreased , while the coefficient of friction is increased . with the increase of electric current density , the wear rate of cf / cu ( c ) - cu composites is increased
研究发现，碳纤维镀铜石墨-铜复合材料的电摩擦磨损性能与碳纤维含量存在一最佳值，当碳纤维含量为0 . 6时，其电摩擦磨损性能最好；对于不同电流密度下的电磨损性能的比较可以发现，通电磨损时的电摩擦系数要小于机械磨损时的摩擦系数，碳纤维镀铜石墨-铜复合材料的电摩擦系数随电流密度增大先减小而后增大，在电流密度为15a cm ~ 2时达到最小值；通电磨损量要远大于机械磨损量，且随着电流密度增大，磨损量增加。 |
- Similar Words：
- "电模似" English translation, "电模型" English translation, "电模型法" English translation, "电模型试验" English translation, "电膜" English translation, "电磨光" English translation, "电磨光；电抛光" English translation, "电磨机" English translation, "电磨轮" English translation, "电磨损" English translation
|
|
|
