| 1. | Heat treatment cycle curve
热处理温度变化曲线 |
| 2. | Ferritic - pealitic steels for precipitation hardening from hot - working temperatures
用热处理温度进行沉降硬化的珠光体型铁素体钢 |
| 3. | The results show : ( 1 ) around 600 is a key carbonization temperature for bamboo
结果表明： ( 1 ) 600左右是竹材炭化的一个非常重要的热处理温度。 |
| 4. | The ideal heat treatment time was about 2 hours and the maximum crystallinity appeared at 130 掳 c
热处理时间在2h左右有较好的效果，而热处理温度在130左右出现最高结晶度。 |
| 5. | The paper explores the effect of the heat treatment temperature on the rupture strength of p91 steel welding joint
摘要探求了热处理温度对p91钢焊接接头持久强度的性能影响。 |
| 6. | The research result indicated that heat treatment time and heat treatment temperature had effect on pvc crystallinity
研究结果表明：热处理温度和热处理时间对pvc的结晶度都有一定的影响。 |
| 7. | The f and n came from the precursor solution and the amount of f decreased with increasing calcination temperature
其中f和n元素来源于前驱体溶液，且tio _ 2薄膜中的f元素含量随热处理温度的升高而减少。 |
| 8. | With increase of heat treatment , agx photochromic glass ' s value of saturation darkening degree higher and fading speed lower
随着热处理温度的提高， agx光致变色玻璃的饱和暗化度增大而复明速率减慢。 |
| 9. | The influence of heat treatment temperature on the properties of 3k pan - based carbon fibers was investigated
摘要在不同温度下对3k聚丙烯腈基炭纤维进行了高温处理，研究了热处理温度对炭纤维结构和性能的影响。 |
| 10. | The results indicated : ( 1 ) the fe2o3 - al2o3 nanocomposites with different fe2o3 content and calcining temperature have different phases
研究表明： ( 1 ) fe _ 2o _ 3含量和热处理温度对复合粉末的相组成有重要影响。 |
