| 1. | Valves - test of flow resistance using water as a test fluid
阀门.用水作为试验流体的耐流动性能试验 |
| 2. | Effect of - ray irradiation on the structure and melt fluidity of uhmwpe
射线辐照对超高分子量聚乙烯结构与流动性能的影响 |
| 3. | Surface active agents . determination of flow properties using as rotational viscometer
表面活性剂.用旋转粘度计测定流动性能 |
| 4. | Method for evaluating the low temperature flow properties of mineral insulating oils after ageing
老化后矿物绝缘油低温流动性能的评价方法 |
| 5. | Advanced technical ceramics - ceramic powders - determination of flowability behaviour of ceramic granule ; german version env 14312 : 2002
高技术陶瓷.陶瓷粉.陶瓷颗粒流动性能的测定;德文版 |
| 6. | Adhesives - test methods for hydraulic setting floor smoothing and or levelling compounds - determination of flow characteristics
胶粘剂.水凝地面平整和或找平填料的试验方法.流动性能的测定 |
| 7. | The simulation results provided important theoretical basis for investigating the factors , which affect the efficiency of oil pump
仿真模拟结果要能够反映机油泵在设计工况的流动性能和特殊流动现象。 |
| 8. | First , by measure the fiber content in different radius range , the influence of pressure and temperature on fluidity is investigated
1 )通过测量挤压流动后不同半径范围内的纤维含量，研究了压力、温度等对材料流动性能的影响。 |
| 9. | The improvement of the flow character in intake port improves the dynamic characters and economy . all this can be used to reduce the cost
提高进气道的流动性能，可以提高发动机的动力性和经济性，这是降低经济成本的有效方法之一。 |
| 10. | Simulation results reveal the well - behaved flow field at design load and the bad - behaved flow field which results in low efficiency at off - design load
泵在设计工况有着良好的流动性能，在非设计工况出现了不良流动现象，影响了泵的效率。 |
