English translation for "注入层"
|
- input horizon
Related Translations:
注入大气: injection into the atmosphere 注入水量: injected water volumequantity of injected watervolume of water input 硼酸注入: boric acid injection
- Example Sentences:
| 1. | Fabrication of ohmic contacts to 4h - sic created by ion - implantation
离子注入层的欧姆接触的制备 | | 2. | Lif acting as the electron inject layer can increase the luminous efficiency and decrease the operating voltage ; cupc acting as the hole inject layer can improve the device ' s stability , but at the same time , it will cause the reduction of brightness and efficiency
Lif作为电子注入层，能够明显提高器件的发光效率，降低器件的工作电压； cupc作为空穴注入层能够使器件稳定性提高，但也导致了亮度和效率的下降。 | | 3. | In this paper , we implanted mn + ion of different dose into undoped semi - insulating ( 100 ) gaas substrate then performed rapid thermal annealing in different temperature and time . studied the different annealing condition dependence of the samples " structure , electrical and magnetic properties and the relation of the mn + forms and these properties
本课题采用离子注入的方法将不同剂量的mn ~ +注入到非掺杂半绝缘( 100 ) gaas单晶衬底中，然后进行不同温度和时间的快速热退火处理，研究了不同的退火条件对样品注入层的晶体结构、电特性和磁特性的影响以及mn ~ +在样品中的存在状态与这些性质之间的关系。 | | 4. | When a mutually doped transitional layer is introduced , no matter it is added to the interspace of electron transport layer and hole transport layer or to the interspace of the hole transport layer and hole inject layer , it can reduce the defects of the interface and result in the increase of brightness and the decrease of the operating voltage obviously
我们在器件中引入了互掺过渡层结构，发现不管在电子传输层和空穴传输层之间，还是在空穴传输层和空穴注入层之间采用这样的掺杂结构，都能够有效减少有机层间的界面缺陷态，明显提高了器件的亮度，降低了器件的工作电压。 | | 5. | This paper has five chapters : the first chapter : describing the evolution of the organic / polymeric electroluminescent device , analyzing its advantages and disadvantages when acting as flat display , introducing the oled structure , luminous mechanics and the methods of increasing the luminous efficiency , etc . the second chapter : discussing the effects on the performance of oled if the lif acts as an electron inject layer and / or cupc acts as a hole inject layer
本文共分五章：第一章：详细叙述了有机聚合物电致发光器件的研究进展，分析了其作为平板显示的优缺点，介绍了oled结构、发光原理和提高其效率的途径等。第二章：讨论了lif作为电子注入层， cupc作为空穴注入层对器件性能的影响。 |
- Similar Words：
- "注入变质" English translation, "注入冰" English translation, "注入材料" English translation, "注入槽" English translation, "注入槽(压铸)" English translation, "注入层段" English translation, "注入掺杂" English translation, "注入成型" English translation, "注入成型机" English translation, "注入成形" English translation
|
|
|
