| 1. | Wood wool slabs . measurement of transverse tensile strength
木丝板.横向拉伸强度试验 |
| 2. | Destructive tests on welds in metallic materials . transverse tensile test
金属材料焊接的破坏性试验.横向拉伸试验 |
| 3. | Destructive tests on welds in metallic materials - transverse tensile test ; german version en 895 : 1995
金属材料焊接破坏试验.横向拉伸试验 |
| 4. | During stage i , the macro - stiffness of mmcs is reducing because of interfacial debonding
当存在渐进适应界面时，复合材料横向拉伸应力?应变曲线存在三个阶段。 |
| 5. | Experimental study of effects of longitudinal tension on transverse tensile mechanical properties of nylon cord - rubber composite
橡胶复合材料横向拉伸力学性能影响的实验研究 |
| 6. | Adhesives for load - bearing timber structures - test methods - determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
承重木结构用胶粘剂.试验方法.通过温度和湿度循环试验测定木纤维酸性腐蚀对横向拉伸强度的影响 |
| 7. | Adhesives for load - bearing timber structures - test methods - part 3 : determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
承重木结构用粘合剂.试验方法.第3部分:通过温度和湿度循环试验测定木纤维酸性腐蚀对横向拉伸强度的影响 |
| 8. | The response of mmcs has a turning point , associated with the initiation of interfacial debonding , which is decided by the interfacial strength . unlike the two predecessors , the evolving complaint interface ( eci ) model allows unloading of interfacial stresses
在常响应界面情况下，复合材料横向拉伸应力?应变曲线存在明显的转折点，对应于界面分离的始发点，转折点的位置取决于界面粘结强度。 |
| 9. | By the analysis , it was found out that the key control factor determined the speed limit and storage energy was the poor transverse tension strength of the composites . therefore , if only fibers of high longitudinal tension strengths were used in the rim , high rotate speed and high energy storage density of flywheel rotor would not be achieved
经过理论推导及程序优化比较，发现，影响飞轮转子极限转速和储能量的主要控制因素，恰好是其复合材料轮环较为薄弱的横向拉伸强度，因此单纯地通过采用高纵向拉伸强度的高强碳纤材料来制造飞轮转子，并不能得到期望的高转速和储能密度。 |
