English translation for "最大变形"
|
- maximum distortion
Related Translations:
扭曲变形: distortional deformationtravesty - paragon 变形能力: ability to deformdeformabilitydeformation propertyformability 变形角: angle of deformationdeformation angle 等温变形: isothermal deformation 变形分析: deformation analysis 抵抗变形: resistance to deformationresistance to distortion 变形再生: morphallactic regenerationmorphallaxiamorphallaxis
- Example Sentences:
| 1. | Plastics piping and ducting systems . injection - moulded thermoplastics fittings for pressure piping systems . test method for maximum deformation by crushing
塑料管道和导管系统.压力管道系统用注模热塑配件.用压碎法测定最大变形的试验方法 | | 2. | Factors influencing its deformation are analyzed by the system , the statistic formula estimating maximum deformation and its place have been obtained
利用该系统，对影响基坑变形的各因素进行了有限元数值模拟分析，得出了简明估算深基坑最大变形及其位置的统计关系式。 | | 3. | Based on the numerical results , an optimum design model , which considers the maximal deformation of the piles as objective function , is put forward with the computer language apdl provided by ansys program
在此基础上，利用ansys软件提供的apdl语言，提出了以桩体最大变形为目标函数的优化设计方法，对板桩间距进行了优化设计。 | | 4. | Imitate to the launch environment , carry through 15g overloading acceleration analysis to the modal , get the maximum deform and stress of mirror tube structure on static force condition , validate the stiffness and the strength of the structure
模拟发射环境,对模型进行了15g过载分析,得出了静力作用下结构中的最大变形和最大应力,验证了系统的刚度和强度。 | | 5. | Results after oral administration of gukangning capsule , the mean trabecular plate density , the mean trabecular plate thickness and the trabecular bone volume , bmd and maximum strain of the rats , were significantly increased more than that of the osteoporotic model ( p < 0 . 05 )
结果经骨康宁治疗后，骨质疏松大鼠的平均骨小梁数、平均骨小梁宽、骨皮质指数、股骨骨密度、股骨的最大变形能力等增加，并明显高于骨质疏松组( p < 0 . 05 ) 。 | | 6. | Then some instances have been put out to certify that the maximum deformations calculated by the method are good enough to meet the need of the engineering . it has also been pointed out that this method has many advantages to direct f . e . m for it needs less parameters and the parameters are easy to be obtained
最后指出这些公式相对于直接利用有限元程序计算有如下的优点：涉及参数少且易确定、实用性强，而且计算方法易掌握，但是并不能准确预测出墙体的整体变形性状与最大变形值的位置。 | | 7. | This is to say , pu composite hollow fiber membranes pore size can become large with transmembrane pressure increasing , and can recover completely with transmembrane pressure reverting to original pressure at a specification condition . from the hagen - poiseuille equal ion , pu composite hollow fiber membrane pore radius magnification was calculated . in our experiment , the variation of membrane pore radius attained to much six times larger than the primitive membrane pore radius
根据一般非变形膜的纯水通量一压力差的直线关系，首次提出了孔径变化分离膜的纯水通量一压力差的曲线关系，并根据hagenf公式，理论上计算出了几种pu复合中空纤维膜最大变形时的膜孔径为原始膜孔径的倍数，最小膜孔径变化也达到原始孔径的一倍多，最大膜孔径变化达到原始孔径的六倍多。 | | 8. | Works on the bending roll system of four - roll rolling mill , the workroll shape variation caused by the force of bending roll and the contact stress between rolls was researched with the fem software ansys , the maximum deformation of the work roll was calculated , and the curve of the gap adopting the least - squares method was fitted , which set the base of the further calculation of load - gap shape
摘要以四辊轧机的弯辊系统为研究对象，利用有限元分析软件ansys研究弯辊力和辊间接触应力引起工作辊形状的变化，计算工作辊弯曲的最大变形量，并用最小二乘法对辊缝曲线进行拟合，为进一步计算有载辊缝形状提供可靠的理论依据。 | | 9. | Theoretical research on the type and mainframe tripled frequency converter : on the basis of building finite element models , dividing grid , application of load in the software of ansys , the dynamic and static performances are calculated , the value of the deformation , the first natural frequency and corresponding mode of the frequency converter are obtained , finally , the dynamic performances of the frequency converter are analyzed
对型三倍频组件和主机三倍频组件的理论研究:采用通用ansys软件对组件进行合理建模,划分网格,施加载荷,在此基础上对它们进行了静态分析和动态分析,得到最大变形量、低阶固有频率和相应的振型,并对组件的动态性能进行了分析。 |
- Similar Words：
- "最大比值合并" English translation, "最大比值平方分集合并法" English translation, "最大比重" English translation, "最大闭锁力" English translation, "最大变幅距离" English translation, "最大变形最大失真" English translation, "最大标定声功率级" English translation, "最大标度" English translation, "最大标准差" English translation, "最大标准温度" English translation
|
|
|
