English translation for "推重比"
|
- thrust loading
thrust mass ratio
thrust weight ratio
thrust-to-weight ratio
thrust-weight ratio
Related Translations:
推重: have a high regard for; hold in esteem: “本草纲目” 问世之后, 深受人们的推重。 the compendium of materia medica has been held in high esteem since it was first published
- Example Sentences:
| 1. | With the rapid development of aero science , it requires the aero engine ratio of traction to weight is higher and higher
随着航空科技的飞速发展，要求提供推重比越来越高的航空动力。 | | 2. | The results showed that the thrust - weight ratio reached 1 . 04 for the launch weight 5400kg in the condition of specific impulse near 600s
结果表明:在发动机工作比冲接近600s的情况下,对于起飞质量为5400kg的飞行器而言,推重比为1 . 04左右。 | | 3. | To optimize specific impulse to 700s or 800s , the thrust - weight ratio could be improved to 1 . 23 or 1 . 41 , it is enough to achieve the launch requirement for this vehicle
进一步将比冲优化至700s或800s ,可以将推重比提高至1 . 23或1 . 41 ,这样就完全能够保证发射任务的完成。 | | 4. | The purpose of this paper is to make extensive study on the essence of impingement / effusion film cooling , and the research results will be applied in futural study on the higher performance aeroengine
本文旨在对冲击-发散复合冷却技术开展机理和基础性研究,研究成果可应用于更高推重比级发动机预研。 | | 5. | With the development of multi - variable control technology and aero - propulsion technology , future excellent engine must have the character , which is high ratio in thrust and weight low fuel and long use life . therefore the control system of aero - engine has also been becoming more and more complicated . the precision of control system is also extra higher
随着高推重比、低油耗、长使用寿命、高机动性航空发动机的研制，现代航空发动机需要控制的变量越来越多、精度越来越高，因此，航空发动机控制系统变得越来越复杂，传统的航空发动机控制系统是采用机械液压控制。 | | 6. | Compress disk is the very important rotational component in the areoengine . when the compress disk is working , the grads of temperature and stress between the rim and the center of the disk are great . in order to raise the thrust - weight ratio of the disk and reduce oil consumption . the best prospective way is the dual alloys disk used
压气机盘是航空发动机上一个很重要的转动部件，压气机盘工作时，轮缘和轮毂温度梯度和应力梯度较大，为了提高飞机发动机推重比、减低耗油量，要求压气机盘的工作温度、使用性能更高，双合金盘制造是最有发展前景的技术。 |
- Similar Words：
- "推至讲开关" English translation, "推中指法" English translation, "推种器" English translation, "推种爪罩" English translation, "推重" English translation, "推帚" English translation, "推皱层理" English translation, "推著自行车上陡坡" English translation, "推助器燃烧室" English translation, "推注 推注" English translation
|
|
|
