English translation for "拉伸模量"
|
- extension modulus
modulus in tension modulus of stretch modulus of transverse elasticity stretch modulus tensile modulus
Related Translations:
流动拉伸: flow drawingflow stretchingflow-drawing 拉伸斜角: extrusion taper angle 拉伸模: drawing diesstretch drawing die 拉伸破坏: fail in tensionte ile fracturete ion fracturetensile failuretensile fracturetension failuretension fracture 拉伸系数: drawing coefficient 拉伸纤维化: fibrilization during drawing
- Example Sentences:
| 1. | Finite element analysis of tension module in 3d braided composites 三维编织复合材料拉伸模量的有限元分析 | | 2. | The results showed that with the increase of heat treatment temperature , both the carbon content and tensile modulus of carbon fibers were enhanced , however the linear density decreased 试验结果表明,随着热处理温度的提高,炭纤维线密度下降,微晶层间距缩小,碳含量、微晶尺寸和拉伸模量得以提高。 | | 3. | Compared with pure pmma , the thermal and mechanical properties of the nanocomposites are obviously improved at a very small amount of mmt ( ommt ) loading . the tgs of the composites via different methods are improved by 10 ~ 26 ? , the decomposition temperatures at weight loss of 5wt % are increased by 42 ~ 99 ? . in the bulk system , tensile strength , tensile modulus and impact strength are improved by 32 . 2 % , 60 . 3 % and 68 . 6 % , respectively , without the loss of light transmittance 相对于纯pmma体系,悬浮法、乳液法及本体法复合材料的t _ g值提高了10 26 ;后两种复合材料热失重5wt的温度提高了42 99 ;而本体法复合材料的拉伸强度、拉伸模量及冲击强度值最大分别提高了32 . 2 、 60 . 3和68 . 6 ,而透光性能基本未受影响。 | | 4. | Theoretical models were used to predict the effects of microcrack - density to effective tensile modulus of cf / ep laminates for long - term duration exposure for it difficult to get from tests . a uniaxial zero - expansion model was established based on the analysis of thermal stress and the coefficient of thermal expansion of the laminates 由于受到试验周期的限制,对于长期暴露于空间环境中的层合板材料,其有效拉伸模量很难用试验方法直接测量,本文采用理论模型进行分析。 |
- Similar Words:
- "拉伸络丝机" English translation, "拉伸门" English translation, "拉伸棉绷带" English translation, "拉伸面" English translation, "拉伸模" English translation, "拉伸模数" English translation, "拉伸膜" English translation, "拉伸耐久性试验" English translation, "拉伸盘" English translation, "拉伸配模计算" English translation
|
|
|