| 1. | Aging stretcher strains
时间效应老化及拉伸应变 |
| 2. | N metallic materials - sheet and strip - determination of tensile strain hardening exponent n - values
金属薄板和薄带拉伸应变硬化指数 |
| 3. | Method of determining the tensile strain hardening exponent for metallic sheet and strip
测定金属薄板材和带材用拉伸应变硬化试样的试验方法 |
| 4. | Tensile strain hardening behaviours of nitrogen strengthening high manganese austenitic cryogenic steel
氮强化高锰奥氏体低温钢的拉伸应变硬化行为 |
| 5. | Iron and steel - method of determination of the tensile strain hardening exponent n of steel sheet and plate
钢铁.薄钢板和钢板拉伸应变硬化指数n的测定方法 |
| 6. | After pretension 0 . 1 strain and pretorsion to 14 , whereas the strength limit keep on increasing in company with the pretorsional capacity
其中屈服极限在预拉伸应变0 . 1后再预扭转14后达到最大值，而强度极限随着预扭转量的提高不断增大。 |
| 7. | Advanced technical ceramics . ceramic composites . methods of test for reinforcements . determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
高技术陶瓷.陶瓷成分.增强的试验方法.环境温度下多纤维牵引内纤维断裂拉伸强度和拉伸应变分配的测定 |
| 8. | The effects of baking temperature , baking time and prestrain on the bake hardenability and dent resistance of isotropic sheet steel and bh sheet steel produced by batch annealing were studied
摘要研究了烘烤温度、烘烤时间和预拉伸应变量对罩式炉退火工艺生产的各向同性钢的烘烤硬化性的影响，并与力学性能相当的冷轧烘烤硬化钢进行了对比。 |
| 9. | Advanced technical ceramics - ceramic composites - methods of test for reinforcements - determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
高级工业陶瓷.陶瓷复合材料.增强纤维的试验方法.室温下复丝束中长丝断开时的拉伸强度和拉伸应变分布的测定 |
| 10. | Advanced technical ceramics - ceramic composites - methods of test for reinforcements - part 5 : determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
先进工艺陶瓷.陶瓷复合材料.增强纤维的试验方法.第5部分:周围温度下复丝束中长丝拉伸强度的分布和断裂拉伸应变的测定 |
