| 1. | Requires no retorquing after long cycling
经过长期循环测试后，不需要回位扭矩。 |
| 2. | Machine tools - test code for machine tools - part 4 : circular tests for numerically controlled machine tools iso 230 - 4 : 1996
机床.机床试验规程.第4部分:数控机床循环测试 |
| 3. | When performing testing based on use cases , the most obvious technique is the process cycle test or algorithm test
当执行基于用例的测试时，最明显的技术是过程循环测试（或规则测试） 。 |
| 4. | The test of dynamic strain history in fatigue experiments has been completed by integrating the above techniques
将上述技术集成，实现了对疲劳试验的动态应变循环测试，同时测试结果得到保存。 |
| 5. | 6 sets memory for front panel setting and test sequence store recall linear amplifier with feedback control to provide highly regulated power
具6组记忆组，供面板设定值储存呼叫与循环测试功能 |
| 6. | Each valve is pressure tested for seat tightness , shell and packing integrity including cycling tests to check for reliability of operation
每个阀门都经过阀座气密性、阀壳和填料整体性的压力测试，包括检验操作可靠性的循环测试。 |
| 7. | To predict reliability , a sound valve design , backed up by a stress analysis must be subjected to functional cycle testing under critical operating conditions
为了实现预期的可靠性，需要科学的阀门设计，建立在应力分析基础上，并在关键工作环境下进行功能性循环测试。 |
| 8. | Through appearance testing , x 射线 testing and temperature cycling testing , the reliability of mixed solder joints and 无 铅 solder joints which formed under various process parameters was assesed
通过对不同工艺参数下形成的混合焊点和无铅焊点进行了外观检测、 x射线检测和温度循环测试。 |
| 9. | At this point , you re not ready to actually test this out with an unmarshal - marshal cycle although you will do that later ; instead , just examine the source and check for potential problems
在目前，您还没有准备好通过解组-编组循环测试输出的结果（尽管以后要这样做） ，首先来分析源代码中可能存在的潜在问题。 |
| 10. | Test for 50 000cycles at a rate not exceeding 10 cycles per minute of alternating flow through the device of zero to the rated flow in accordance with table 12 . 2 , at ambient water temperature
在环境水温下，按照表12 . 2 ，以每分钟通过装置的交变流量（在0 ~额定流量之间）循环次数不超过10的速率，进行50000次循环测试。 |
