| 1. | Draw the element for maximum shear stress and mark values of all stresses .
画出最大剪应力的单元体并标出全部应力值。 |
| 2. | The values for the stresses are assumed to be linearly proportional to the pressure .
这些应力值被假定为与压力成线性比例关系。 |
| 3. | The equation gives the value of the bending stress at any distance v from the neutral axis .
此式给出了至中性轴任意距离V处的弯曲应力值。 |
| 4. | The equation gives the value of the bending stress at any distance v from the neutral axis
此式给出了至中性轴任意距离v处的弯曲应力值。 |
| 5. | Under macrostrain large strain , the equivalent effective stress of pure torsion was higher
在大应变下，由扭转实验测得的等效应力值较高。 |
| 6. | The results show that there are several points of high regional shear stress in shanxi province
结果显示陕西地区存在几个应力值较高的地区。 |
| 7. | Bond stress in the state of bond - slip should be adopted in the foundation design
当设计人员在设计基础时，只能够采用在滑动摩阻状态下的粘着应力值。 |
| 8. | As the dimension of kinds of stress are different , the function of kinds of stress are different
由于各应力值的不同，故各应力在旋流场中的作用也各不相同。 |
| 9. | Testing of rubber ; determination of tensile strength at break , tensile stress at yield , elongation at break and stress values in a tensile test
橡胶试验.在抗拉伸试验中断裂抗拉强度屈服应力值 |
| 10. | A 3 - d solid modeling is applied to the simulation , which describes the interaction influencing on the structure and soil
数值模拟结果表明，箱体结构前端的位移和应力值受箱体结构长度的影响较大。 |
