English translation for "干燥塔"

demoisturizer
demopsturizing column
drying chamber
drying column
drying tower
sulfuric acid tower
tower drier
tower driver
tower dryer

Related Translations:

气体干燥塔:  gas drying towergas drying unit

氯气干燥塔:  chlorine gas drying towerchlorinegasdryingtower

硫酸干燥塔:  sulfuric acid tower

喷雾干燥塔:  spray drying tower

牧草通风干燥塔:  ventilated hay tower

塔式干燥器 干燥塔:  towerdrier

Example Sentences:

	1.	Spray drying plant computer control 喷雾干燥塔计算机控制系统
	2.	The wall sticking of half wet material is concerned to the structure , fixing and operation of spray drying tower and sprayer , the motion of hot air in tower 半湿物料粘壁主要与喷雾干燥塔结构、雾化器结构、安装、操作以及热风在塔内的运动状态有关。
	3.	The dried powder product was formed in the spray dryer by pressure nozzle which atomized liquid into small droplets and heat and mass transferring was performed between droplets and hot medium in the drying chamber 压力喷雾干燥装置是利用压力雾化装置将原料液分散成细小雾滴，并与热介质在干燥塔内充分进行热量、质量交换，最终达到干燥产品的目的。
	4.	The preliminary results obtained from the industrial production showed that the volumetric evaporation intensity and energy consumption efficiency would be up to 12kgh2o / m3 . h and 60 % respectively to use the combined spin - flow pressure spray dryer . moreover , the combined spin - flow pressure sp 应用结果表明：采用新型的旋流式压力喷雾干燥塔的体积蒸发强度可达12kgh _ 2o m ~ 3 ? h ，能源利用率可达60 ，既提高了产品的质量和产量，又降低了设备投资和土建规模。
	5.	The key items influent on the characteristics of spraying have been also studied in the dissertation , we can get a good spraying result by adjusting the related parameters efficiently . ( 3 ) the theoretical model of the dynamical parameters such as temperature , moisture , pressure and contour for hot medium and particle inside the drying chamber were obtained by model , utilized the computational fluid dynamics technique to solve the problem between spraying droplets medium by arranging the double grid dispersing structure and rotary outlet structure and the developed structure improved the drying efficiency and product quality ( 3 )采用-模型实现了压力喷雾干燥塔的温度场、湿度场、流场的理论建模，利用计算流体力学( cfd )技术来解决喷雾干燥过程中热介质与雾滴间的传热传质以及动量传递和湍流扰动等问题，避免了干燥过程中的设计不合理状况；通过增加双格栅均风装置和旋转出风装置，改善了干燥塔内的热质传递，提高了干燥塔的体积蒸发强度。
	6.	A novel type double grid dispersing structure is designed and set on the top of the drying chamber which increase the mingling degree of the liquid with the gas and reducing the invalid area of the drying chamber . the combined spin - flow pressure spray drying equipment has more superiority to the thermal sensitive material ( 5 )本文创造性地设计了新型的双格栅均风装置并设置在压力喷雾干燥塔的上部，强化了干燥塔内气、液两相间的混合，最大限度地消除了干燥塔内的无效区域，对热敏性物料的干燥更显出该结构型式的优越性。
	7.	The dehydration time is square of the droplets diameter so the small diameters of the droplets can cut down the drying time then reduce the height of the drying chamber . to the combined spin - flow pressure spray drying , the diameters of droplets are small and the dehydration rate is higher so keeping the qualities of the dried products we can increase the speed of the inlet wind and reduce the temperature of the outlet wind thus can improve the evaporation intensity of the drying chamber and the average energy utilization of the drying equipment 因雾滴的脱水时间与其直径的平方成正比，减小液滴直径有利于缩短干燥脱水时间，可有效降低干燥塔的高度；由于旋流式组合压力喷嘴雾化滴径的减小，脱水速度明显加快，在不影响干燥物料性质的前提下，适当提高进风温度，同时有效地降低排气温度，有利于提高干燥塔的蒸发强度，也有利于提高干燥设备的平均能源利用率。
	8.	In this dissertation , the author summed up the muti - technique in fluid dynamics , heat and mass transferring , mechanical designing and computational technique and studied the conventional pressure spray dryers with different air disperse structure and outlet equipment , at last put forward the theme i . e . the study on combined spin - flow pressure spray drying technology , the main contents were as follows : ( 1 ) the combined spin - flow pressure nozzle was designed whose novel structure has no report at present , and the structural designing parameters were obtained through analyzing the physical characteristic of materials and distribution of particles 本文总结了国内外在压力喷雾干燥装置的研究应用状况，并分析了现有喷雾干燥装置设计方面的优缺点，运用流体力学、空气动力学、传热传质学、机械设计和计算机技术等多学科知识，综合研究了传统压力喷雾干燥系统的单喷嘴雾化装置在并流、逆流以及混流干燥中的应用和喷雾干燥塔的不同布风装置以及出风装置的设置情况等，提出了新型旋流式组合压力喷雾干燥技术并对此进行了研究，其主要内容包括： ( 1 )本文创造性地设计出旋流式组合压力喷嘴的基本结构，并通过对料液的物化特性研究分析以及颗粒度的分布要求，给出了喷嘴的不同结构设计参数。
	9.	Pressure spray dryers have been widely used in foodstuff , chemicals , medicaments , building materials , environmental protection , etc . as one of the most energy consumption , it is quite valuable to study how to make the spray dryer save energy consumption , enhance volumetric evaporation intensity , decrease its environmental pollution and running cost , improve its productivity through automatic controlling system and cut down the investment on equipment 作为能源消耗的大户之一的喷雾干燥，如何在保证干燥产品质量的前提下，进一步提高能源利用率，提高干燥塔的体积蒸发强度；减少环境污染，降低运行成本；加强系统的自动化程度以提高劳动生产率；在提高产品质量的同时减小设备尺寸，减少固定投资等都具有重要的研究和应用价值。

Similar Words：

"干燥速度曲线" English translation, "干燥速率" English translation, "干燥速率曲线" English translation, "干燥隧道" English translation, "干燥损失" English translation, "干燥台" English translation, "干燥碳酸钠" English translation, "干燥梯度" English translation, "干燥体温和压力" English translation, "干燥天气" English translation