English translation for "对接机构"
|
- docking hardware
docking mechanism
Related Translations:
对接: abutment; abutting joint; butt-joint; butt to butt; end-to-end joint; opposite joint; [航天] dock; docking link up◇对接触点 [电学] butt contact; 对接法兰 plain flange; 对接焊 butt welding; 对接装配 pick(-)up 对接线: breaklinebutted line 单行铆钉对接: single riveted butt jointsingle-riveted butt joint
- Example Sentences:
| 1. | Based thorough analysis in space docking dynamics and loop control , test - bed ’ s virtual prototype is presented in paper
基于对空间对接动力学和大回路控制的深入分析,文章建立了对接机构综合试验台的虚拟样机。 | | 2. | Because of “ cone - pole ” docking mechanism ’ s simple structure and widely application , this paper takes test - bed with this mechanism as the research object
由于“锥?杆”式对接机构结构简单,应用广泛,文中主要以该结构为例,对试验台系统进行了研究。 | | 3. | When mass of docking mechanism simulator is too small to be calculated comparing to the mass of two aero crafts , docking of the aero crafts can be equal to collision between two rigid bodies
对接机构模拟装置的质量相对于两飞行器质量忽略不计时,空间两飞行器间的对接可以近似等效为两刚体间的碰撞问题。 | | 4. | Docking mechanism test - bed is mainly used to simulate dynamics process of two aerocraft ’ s docking on the ground , validate rationality of the mechanism ’ s design and estimate stability of the docking process
对接机构综合试验台主要用于地面模拟空间两飞行器对接的动力学过程,对机构设计的合理性、对接过程中的稳定性进行验证和评估。 | | 5. | By employing the development of the rvd simulation system as the research background , the main work of this dissertation is to study the docking dynamics of spacecraft with peripheral docking mechanisms and to develop the docking dynamics simulation system ( ddss )
本文以交会对接仿真系统研制为背景,研究了带有周边式对接机构的航天器对接动力学问题,并开发了对接动力学仿真系统( ddss ) 。 | | 6. | Firstly , the components , and principle of docking mechanism test - bed are introduced . then based on development of spatial docking technology , main structures about docking mechanism and it ’ s characteristics , development survey are introduced
首先,介绍了对接机构综合试验台的组成和工作原理,然后结合空间对接技术的发展背景,介绍了对接机构的主要结构、特点,对接仿真技术的发展概况。 | | 7. | Due to the electrohydraulic servo mechanism was used to drive the motion deck of the semi - physical simulator on the ground . therefore , the model of electrodraulic servo mechanism was built based on the fundamental equations of hydraulic jar and servo valve
由于空间对接机构地面半物理仿真系统采用电液伺服驱动机构,因此本文根据电液伺服驱动机构的基本方程,建立单缸电液伺服驱动机构的模型。 | | 8. | 4 . simulation model for capture and buffer phase is built based on adams software , in the model , capture ring is accurately built with full consideration of actual geometrical feature , buffer system is modeled the same as that of ddss , and adams impact model
4 .建立了捕获段与缓冲段的adams仿真模型,其中对接机构采用精确的实体三维模型,缓冲力模型同上,接触力采用adams软件提供的的impact模型。 | | 9. | Another 20 kinds of non - designed contact points are given for the first time . contact determining algorithm of all the above contact types is given using z - buffer algorithm for 3 - d observation , and simulation results show high accordance with results of vector - associated method . simulation for non - designed contact mode with random initial conditions has been done too , and statistics from the simulation indicates that it is important to predict non - designed contact points in practical rvd efforts
全文的工作包括以下几个方面的内容: 1 .建立了周边式对接机构的复杂几何外形的数学描述,描述了对接初始条件范围内,两对接机构相互接近、捕获过程中可能出现的20种设计接触模式,并针对初始接触点首次提出20种非设计接触模式;利用计算机图形学中可见面判别的z -缓冲算法原理,给出了所有接触模式的检测算法,该算法的仿真结果与辅助向量法高度一致,验证了算法的有效性;进行了300组确定首次接触点的随机仿真,统计结果表明,在飞船上实时进行非设计接触模式的预测是非常重要的。 |
- Similar Words：
- "对接合适" English translation, "对接后的飞行" English translation, "对接后机动" English translation, "对接环" English translation, "对接机动" English translation, "对接激光" English translation, "对接件的卷边" English translation, "对接胶" English translation, "对接铰链" English translation, "对接角" English translation
|
|
|
