| 1. | Locate the tuner in a convenient location at the operating position
在工作状态，把调谐器调整到在一个方便的位置。 |
| 2. | Then , the space kinematics is stimulated , which gives the work rules of arresting hook
进行了拦阻钩空间运动干涉分析,研究了拦阻钩在工作状态下的运动规律。 |
| 3. | When ca100 is in working status , insert management card into ca100 , the multi - function screen shows “ collect data ? ”
在工作状态下，将管理卡插入ca100 ，多功能显示屏显示“采集数据？ ” |
| 4. | It showed that the predicted thermal stresses and deformations in the working condition were qualitatively reliable
因此可以认为对封装结构在工作状态下的热应力和变形的数值模拟结果是可靠的。 |
| 5. | If the display area is pushed hard during operation . some font will be abnormally displayed but it resumes normal condition once turning off
如果在工作状态下，显示区被用力压迫，某些字符会显示错误，但关闭一次后会恢复正常。 |
| 6. | Under working station , engineer structure and working piece ' s deformation could always be treated as small deformation added to existent deformation caused by initial stress
工程结构和构件在工作状态的变形运动总可以看作是在含静态初应力位形上附加了小变形运动。 |
| 7. | For the requests of the system , the performance of components is discussed and the mode analysis of force sensor - micro cantilever is conducted in its working status
针对系统对元件的性能要求,分析了元件的性能,并针对力传感器?微悬臂在工作状态下的性能进行了模态分析。 |
| 8. | In the working status , insert a management card into ca100 , the multi - function screen shows “ collect data ? ” , then press set key , the screen shows “ adjust clock
在工作状态下，将管理卡插入ca100 ，多功能显示屏显示“采集数据？ ” ，按下set键，多功能显示屏显示“调整时钟？ ” |
| 9. | In the working status , insert a management card to ca100 , the multi - function screen will show “ adjust clock ? ” , press mode key twice , the screen will show “ clear memory
在工作状态下，将管理卡插入ca100 ，多功能显示屏显示“采集数据？ ” ，按mode键2次，多功能显示屏显示“清除内存？ ” |
| 10. | In working status , put the attendance card in the antenna inductive zone ( 2cm ) of internal and external card reader , the card reader will tootle and the screen will display id number or the card number
在工作状态下，将考勤卡放在考勤机内置和外置打卡感应区2厘米内，相应的打卡头发出“嘀”声，多功能显示器显示考勤卡的工号或卡号。 |
