Mobile
Log In Sign Up
Home > chinese-english > "回火马氏体" in English

English translation for "回火马氏体"

tempered martensite

Related Translations:
回火裂纹:  tempering crack
回火作用:  drawing effect
回火曲线:  tempering curvetemperingcurve
回火碳:  temper carbontemper graphitetempercarbon
回火性能:  tempering property
回火爆炸:  back draft
回火裂痕:  tempering cracktexture
回火装置:  back fire arrangementback-fire arrangement
真空回火:  vacuum tempering
加压回火:  press temperingpress tension column
Example Sentences:
1.Acicular tempered martensite
针状回火马氏体
2.Long durability and low consumption : sssteel shot havefewer interior flaws . they are made of tempered martensite and can resist impulses . a long durability is ensured
寿命长,消耗量少: ss钢丸内部缺陷少,金相组织为回火马氏体所组成,耐冲击性强,寿命长。
3.Long durability and low consumption : sg steel grits havefewer interior flaws . they are made of tempered martensite and can resist impulses . a long durability is ensured
钢砂寿命长,消耗量少: sg钢砂内部缺陷少,金相组织为回火马氏体所组成,耐冲击性强,寿命长。
4.Long durability and low consumption : stainless steel shot havefewer interior flaws . they are made of tempered martensite and can resist impulses . a long durability is ensured
不锈钢丸寿命长,消耗量少:内部缺陷少,金相组织为回火马氏体所组成,耐冲击性强,寿命长。
5.The result shows that tempered martensite has apparent lath character when temper is between 740 ~ 780 , and the hardness of welded joint is 264 ~ 237hv , which can get better performance of the welded joint the lath character of martensite in welded joint disappears , and the carbide in the tempered sorbite of the base metal will aggregate when temper temperature is above 780 , and the hardness and plastic property will reduce obviously
结果表明,在740 ~ 780之间回火,焊缝硬度为264 ~ 237hv ,回火马氏体板条特征明显,可以获得优良的焊接接头性能;回火温度超过780 ,焊缝板条马氏体特征消失,母材回火索氏体中碳化物产生偏聚,硬度、塑性明显降低。
6.Based on the analyses on mechanical properties , microstructure and fracture of - the microalloyed steels socrv with various heat treatment technique , it can be affirmed that various fractures arttribute to various mechanism , we can draw conclusion that the strength and toughness of microalloyed steels 50crv will be increase simultaneously by optimal heat treatment technique . to illustrate the mechanism of the strength and toughness of microalloyed steels socrv , we designed the comparative experiment and observed the microstructure of the sample which occurred at different quench and tempering temperature and different tempering time . the last experiment results were determined by the four factors : fined microalloyed elements grains , the decompound of martensite , martensite transformation of remnant austenite and the second phase precipitation
为解释微合金化50crv钢强韧化机理,本文通过对不同淬火温度,回火温度,回火时间下的力学性能指标的对比及显微分析,认为微合金元素的细化晶粒,马氏体的回火分解,残余奥氏体的转变,第二相的沉淀析出共同决定了微合金钢的强韧化情况,特别是由于微合金元素的存在,其细化晶粒及其碳氮化物的沉淀析出,导致钢的良好的强韧性,并且如果工艺满足第二相的沉淀析出强化大于回火马氏体分解引起的软化效应,会在硬度曲线中产生明显的二次硬化现象。
Similar Words:
"回火炉" English translation, "回火炉房" English translation, "回火炉装料" English translation, "回火麻田散体, 回火麻田散铁" English translation, "回火麻田散铁(吐粒散铁)" English translation, "回火马氏体脆化" English translation, "回火母曲线" English translation, "回火判据" English translation, "回火铅槽" English translation, "回火铅基轴承合金" English translation