English translation for "喷射高度"
|
- jetting height
Related Translations:
程序喷射: programmed injection 喷射钻井: jet drillingjet-drillingjetted welljettedwelljetting drilling 喷射润滑: jet lubricationsplash lubrication
- Example Sentences:
| 1. | The two constituents project to different heights . 这两种组元的喷射高度不同。 | | 2. | The conclusions are drawn as following : 1 . regularity of fabrication in aluminum matrix composite ring - shaped performs with large dimensions and effects of parameters were investigated , based on the novel crucible movable spray deposition technology and equipment . the optimal parameters are that the diameter of the delivery tube is 3 . 8mm , spray gas pressure is 0 . 8mpa , spray height is 200mm , and transferring pressure of sic is 0 . 5mpa 通过系统的实验研究得到如下结论: 1 .基于新型的移动坩埚自动化控制喷射沉积环坯制备技术及装置,研究了大尺寸铝基复合材料环坯的制备规律,讨论了喷射沉积工艺参数对沉积坯形成过程的影响,得到了最佳工艺参数:导流管直径d = 3 . 8mm ,雾化气体压力p = 0 . 8mpa ,喷射高度h = 200mm , sic颗粒输送压力p送= 0 . 5mpa 。 | | 3. | The optimal parameters of making high silicon content aluminum alloys is : spray height is 220 - 230mm , spray angle is 30 ? the scanning velocity of atomizer is 30mm / s , the original offset of the substrate is 30mm , rotation velocity of the substrate is 120rpm , spray gas pressure is l . ompa , the diameter of the delivery tube is 3 . 6mm , the drawing velocity of the substrate will be adjusted on - line with a plc on the basis of the spray 通过对多层喷射沉积原理及工艺参数的研究,得出制备al - 22si - 3cu - 1mg合金的最佳工艺参数为:喷射高度为220mm - 230mm ,基底转速为120rpm ,雾化器扫描速度为30mm / s ,基底下降转速依据喷射情况由智能控制器进行实时调整,喷射角度为30 ,初始偏心距为30mm ,导流管直径为3 . 6mm ,雾化气压为1 . 0mpa 。 |
- Similar Words:
- "喷射粉碎机" English translation, "喷射风洞" English translation, "喷射腐蚀" English translation, "喷射干燥器" English translation, "喷射钢粒钻进" English translation, "喷射给水器" English translation, "喷射功" English translation, "喷射鼓风机" English translation, "喷射刮管器" English translation, "喷射管" English translation
|
|
|