| 1. | Magnetic driven autoclaves
磁力驱动反应釜 |
| 2. | Certificate holders ' data report for concrete reactor vessels containments
混凝土反应釜容器和外壳的合格证书持有人的数据报告 |
| 3. | Weldability and welding procedure of titanium clad steel plate for the manufacture of a reaction vessel
钢复合板反应釜筒体的焊接工艺 |
| 4. | Applying the above mentioned rules there is no risk of an vapor phase explosion inside the standard equipment
应用上述规则，在标准反应釜内无蒸汽爆炸风险。 |
| 5. | For use in polymerization reactors where residence time is over 5 minutes , see recommendations on page 6
当在停留时间超过5分钟的聚合反应釜中使用时，参见第6页的说明。 |
| 6. | Simulation results for a non - isothermal cstr process demonstrate the effectiveness and efficiency of the proposed method
通过非绝热连续反应釜的仿真验证了本方法的有效性。 |
| 7. | Perfect equipment . one or two reactors are adopted in batch type plant , three or four reactors are adopted in
在间歇方式中包含一个或两个反应釜,在连续方式中包含三个或四个反应釜 |
| 8. | Two modes for accumulating the jacobians of the modules , direct mode and indirect mode are discussed and the
通过精馏塔稳态优化和缩聚反应釜动态优化问题验证了上述分析方法的有效性。 |
| 9. | Arc sprayed aluminium composite coating can increase the service life of reaction caldron up to the design life
采用电弧喷涂铝复合涂层来解决反应釜的腐蚀问题，可使其达到或超过设计寿命。 |
| 10. | The calculated results for the mass transfer coefficients in pipe flows and stirrer tanks agree well with the measured data reported in articles
模型计算结果与管道流及搅拌反应釜的实验结果吻合较好。 |
