| 1. | Neutron flux distributions in the reactor core are measured
测量了反应堆堆芯里的中子通量分布。 |
| 2. | A measurement method regarding reactor core thermal power and error analysis
反应堆堆芯热功率测量方法及其误差分析 |
| 3. | The method is used to measure the neutron flux distribution in the reactor core
这种方法被用来测量反应堆堆芯的中子通量分布。 |
| 4. | Measurements for monitoring adequate cooling within the core of pressurized light water reactors
加压轻水反应堆堆芯中适度冷却的监测 |
| 5. | The physical parameters of the reactor core are calculated by method of the two - group theory
应用双群理论计算了反应堆堆芯物理常数。 |
| 6. | There are altogether 157 fuel assemblies with 264 fuel rods per assembly in the reactor core at
的反应堆堆芯共有157个燃料组件，而每个燃料组件有264支燃料棒。 |
| 7. | Iiie standard guide for use of melt wire temperature monitors for reactor vessel surveillance , e 706
使用反应堆堆芯压力容器监督用熔丝温度监视器的标准指南. e 706 |
| 8. | The fuel rods then assembled in clusters to form the fuel assemblies for loading into the reactor core
燃料棒集中后，会组合成为燃料组件，供放入反应堆堆芯使用。 |
| 9. | The fuel rods then assembled in clusters to form the fuel assemblies for loading into the reactor core
燃料棒集中后，会组合成为燃料组件，供放入反应堆堆芯使用。 |
| 10. | With water circulating through the reactor core at high pressure above 150 bars 1 bar 100 kpa to extract the heat generated by
，冷却水会在超过150巴1巴100千帕的高压下流过反应堆堆芯，并带出 |
