English translation for "双曲轴"
|
- double-crank shaft
double-crankshaft
Related Translations:
曲轴转角: ca crank anglecrank angle 曲轴减振器: crankshaft vibration damper 曲轴位置: ccrank shaft positionckcrank shaft positionckcrankshaft positioncrankshaft position 曲轴磨床: crank grindercrank shaft grindercrank shaft grinding machinecrankshaft grindercrankshaft grinding machine 曲轴机理: crankshaft mechanism 双拐曲轴: double-throw crankshafttwo-throw crankshaft 平衡曲轴: balanced crankshaft
- Example Sentences:
| 1. | Clamping unit contains two crankshaft and is made of high - intensity steel . it uses straight - line rail which runs fast and easily
采用高拉力钢制造的双曲轴锁模机构、移动部件采用直线导轨，具有高刚性、运行轻快等特点。 | | 2. | 6 . recruitedbattery shell technology and would go on mass - producing . 7 . the third generation double deform spindle connected pole press was improved and cutting design would prolong tool life . from 50000 times to 150000 times
7 .第三代双曲轴连杆冲床改善及模板分割设计，以增加模具寿命从50 , 000次到150 , 000次。 | | 3. | This article optimizes the mechanism and establish the model of new type internal - combustion engine based on virtual prototyping technology according to the demand of the mechanism with double connecting rods and crankshafts
本文根据新型双连杆双曲轴内燃机的开发要求，以虚拟样机技术为基础，对双连杆双曲轴运动机构设计方案进行仿真优化，建立了新型内燃机的虚拟样机模型。 | | 4. | After ascertaining the motion projection , the engine model with double connecting rods and crankshafts is established and the rationality about the structure of the model has been tested . at the same time , the standard component parts library such as bolt , nut , bond and pin is builded , which will be convenient to later design
确定运动机构方案后，在分析装配模型，装配关系等基础上用solidworks建立了零件库和螺栓、螺母、键、销等标准件库，根据内燃机结构特点实现新型双连杆双曲轴内燃机的装配模型，并检查了整个样机模型设计的合理性。 | | 5. | According to the demand of top _ down design method , the motion projection with double connecting rods and crankshafts must be optimized firstly . based on the analyse the structure characteristic , the software is developed with c - h - builder , which can be applied to study the influence on the motion from dimension and tolerance . at last , the best motion projection is ascertained
根据内燃机的自顶向下设计要求，首先进行双连杆双曲轴运动机构运动方案的设计与优化，针对新型双连杆双曲轴内燃机的结构特点，运用c + + builder开发了双连杆双曲轴运动机构分析软件。 | | 6. | Dynamic analyse is fulfiled with adams on the the study of theory on dynamic simulation according to the practical model . the splines are drawn out in different working condition . this article discusss how to apply virtual prototyping technology to design new type internal - combustion engine and optimizes the model so as to shorten design and research time
在探讨运动机构动力学仿真理论的基础上，结合双连杆双曲轴运动机构模型，用adams软件进行动力学仿真，得出该机构在多种运动条件下的相关数据和曲线，进一步检验了样机的结构合理性和设计正确性。 |
- Similar Words：
- "双曲折联接" English translation, "双曲折整流器" English translation, "双曲正割" English translation, "双曲正切" English translation, "双曲正弦" English translation, "双曲轴发动机" English translation, "双曲轴压机" English translation, "双曲轴压力机" English translation, "双曲轴轧机" English translation, "双曲肘合膜装之置" English translation
|
|
|
